Current File : //snap/lxd/current/share/openvswitch/scripts/ovs-ctl
#! /bin/sh
# Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014, 2016, 2017 Nicira, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
case $0 in
*/*) dir0=`echo "$0" | sed 's,/[^/]*$,,'` ;;
*) dir0=./ ;;
esac
. "$dir0/ovs-lib" || exit 1
for dir in "$sbindir" "$bindir" /sbin /bin /usr/sbin /usr/bin; do
case :$PATH: in
*:$dir:*) ;;
*)
case $dir in
$sbindir | $bindir) PATH=$dir:$PATH ;;
*) PATH=$PATH:$dir ;;
esac
esac
done
## ----- ##
## start ##
## ----- ##
insert_mod_if_required () {
## This takes care of inserting any required kernel modules
ovs_kmod_ctl insert
}
set_hostname () {
# 'hostname -f' needs network connectivity to work. So we should
# call this only after ovs-vswitchd is running.
if test X$FULL_HOSTNAME = Xyes; then
hn="$(hostname -f)" || hn="$(uname -n)"
else
hn="$(uname -n)"
fi
# Set the hostname if it wasn't set before
ovs_vsctl add Open_vSwitch . external-ids hostname="$hn"
}
set_system_ids () {
set ovs_vsctl set Open_vSwitch .
OVS_VERSION=`ovs-vswitchd --version | awk '/Open vSwitch/{print $NF}'`
set "$@" ovs-version="$OVS_VERSION"
case $SYSTEM_ID in
random)
id_file=$etcdir/system-id.conf
uuid_file=$etcdir/install_uuid.conf
if test -e "$id_file"; then
SYSTEM_ID=`cat "$id_file"`
elif test -e "$uuid_file"; then
# Migrate from old file name.
. "$uuid_file"
SYSTEM_ID=$INSTALLATION_UUID
run_as_ovsuser touch "$id_file"
echo "$SYSTEM_ID" > "$id_file"
elif SYSTEM_ID=`uuidgen`; then
run_as_ovsuser touch "$id_file"
echo "$SYSTEM_ID" > "$id_file"
else
log_failure_msg "missing uuidgen, could not generate system ID"
fi
;;
'')
log_failure_msg "system ID not configured, please use --system-id"
;;
*)
;;
esac
set "$@" external-ids:system-id="\"$SYSTEM_ID\""
set "$@" external-ids:rundir="\"$rundir\""
if test X"$SYSTEM_TYPE" != X; then
set "$@" system-type="\"$SYSTEM_TYPE\""
else
log_failure_msg "no default system type, please use --system-type"
fi
if test X"$SYSTEM_VERSION" != X; then
set "$@" system-version="\"$SYSTEM_VERSION\""
else
log_failure_msg "no default system version, please use --system-version"
fi
action "Configuring Open vSwitch system IDs" "$@" $extra_ids
}
check_core_config () {
if test X"$DUMP_HUGEPAGES" = Xyes; then
echo 0x7f > /proc/self/coredump_filter
if test X"$FORCE_COREFILES" = Xyes; then
ulimit -c unlimited
fi
elif test X"$FORCE_COREFILES" = Xyes; then
ulimit -c 67108864
fi
}
del_transient_ports () {
for port in `ovs-vsctl --bare -- --columns=name find port other_config:transient=true`; do
ovs_vsctl -- del-port "$port"
done
}
do_start_ovsdb () {
check_core_config
if daemon_is_running ovsdb-server; then
log_success_msg "ovsdb-server is already running"
else
# Create initial database or upgrade database schema.
upgrade_db $DB_FILE $DB_SCHEMA || return 1
# Start ovsdb-server.
set ovsdb-server "$DB_FILE"
for db in $EXTRA_DBS; do
case $db in
/*) ;;
*) db=$dbdir/$db ;;
esac
if test ! -f "$db"; then
log_warning_msg "$db (from \$EXTRA_DBS) does not exist."
elif ovsdb-tool db-version "$db" >/dev/null; then
set "$@" "$db"
else
log_warning_msg "$db (from \$EXTRA_DBS) cannot be read as a database (see error message above)"
fi
done
if test X"$SELF_CONFINEMENT" = Xno; then
set "$@" --no-self-confinement
fi
set "$@" -vconsole:emer -vsyslog:err -vfile:info
set "$@" --remote=punix:"$DB_SOCK"
set "$@" --private-key=db:Open_vSwitch,SSL,private_key
set "$@" --certificate=db:Open_vSwitch,SSL,certificate
set "$@" --bootstrap-ca-cert=db:Open_vSwitch,SSL,ca_cert
[ "$OVS_USER" != "" ] && set "$@" --user "$OVS_USER"
[ "$OVSDB_SERVER_OPTIONS" != "" ] && set "$@" $OVSDB_SERVER_OPTIONS
start_daemon "$OVSDB_SERVER_PRIORITY" "$OVSDB_SERVER_WRAPPER" \
"$OVSDB_SERVER_UMASK" "$@" || return 1
# Initialize database settings.
ovs_vsctl -- init -- set Open_vSwitch . db-version="$schemaver" \
|| return 1
set_system_ids || return 1
if test X"$DELETE_BRIDGES" = Xyes; then
for bridge in `ovs_vsctl list-br`; do
ovs_vsctl del-br $bridge
done
fi
if test X"$DELETE_TRANSIENT_PORTS" = Xyes; then
del_transient_ports
fi
fi
}
start_ovsdb() {
if test X"$OVSDB_SERVER" = Xyes; then
do_start_ovsdb || return 1
fi
return 0
}
add_managers () {
# Tell ovsdb-server to connect to the remote managers. If ovs-vswitchd
# is not finished configuring, it may mean that remote managers will
# see more churn in the database at startup or restart. (For example,
# managers may briefly see empty datapath-id or ofport columns for
# records that exist at startup.). However, the alternative is a
# 'bricked' system, so we allow database connectivity regardless.
if test X"$OVSDB_SERVER" = Xyes || test X"$OVS_VSWITCHD" = Xyes; then
if daemon_is_running ovsdb-server; then
action "Enabling remote OVSDB managers" \
ovs-appctl -t ovsdb-server ovsdb-server/add-remote \
db:Open_vSwitch,Open_vSwitch,manager_options
fi
fi
}
do_start_forwarding () {
check_core_config
insert_mod_if_required || return 1
if daemon_is_running ovs-vswitchd; then
log_success_msg "ovs-vswitchd is already running"
else
# Increase the limit on the number of open file descriptors.
# On Linux, ovs-vswitchd needs about three file descriptors
# per bridge and "n-handler-threads" file descriptors per bridge
# port, so this allows a very large number of bridges and ports.
MAXFD=65535
if [ $(ulimit -n) -lt $MAXFD ]; then
ulimit -n $MAXFD
fi
# Start ovs-vswitchd.
set ovs-vswitchd unix:"$DB_SOCK"
set "$@" -vconsole:emer -vsyslog:err -vfile:info
if test X"$MLOCKALL" != Xno; then
set "$@" --mlockall
fi
if test X"$SELF_CONFINEMENT" = Xno; then
set "$@" --no-self-confinement
fi
[ "$OVS_USER" != "" ] && set "$@" --user "$OVS_USER"
[ "$OVS_VSWITCHD_OPTIONS" != "" ] &&set "$@" $OVS_VSWITCHD_OPTIONS
start_daemon "$OVS_VSWITCHD_PRIORITY" "$OVS_VSWITCHD_WRAPPER" \
"$OVS_VSWITCHD_UMASK" "$@" || return 1
fi
}
start_forwarding () {
if test X"$OVS_VSWITCHD" = Xyes; then
do_start_forwarding || return 1
fi
if test X"$RECORD_HOSTNAME" = Xyes; then
set_hostname &
fi
return 0
}
start_ovs_ipsec () {
if test X$RESTART_IKE_DAEMON = Xno; then
no_restart="--no-restart-ike-daemon"
fi
${datadir}/scripts/ovs-monitor-ipsec \
--pidfile=${rundir}/ovs-monitor-ipsec.pid \
--ike-daemon=$IKE_DAEMON \
$no_restart \
--log-file --detach --monitor unix:${rundir}/db.sock || return 1
return 0
}
## ---- ##
## stop ##
## ---- ##
stop_ovsdb () {
if test X"$OVSDB_SERVER" = Xyes; then
stop_daemon ovsdb-server
fi
}
stop_forwarding () {
if test X"$OVS_VSWITCHD" = Xyes; then
stop_daemon ovs-vswitchd
fi
}
stop_ovs_ipsec () {
stop_daemon ovs-monitor-ipsec
}
## --------------- ##
## enable-protocol ##
## --------------- ##
enable_protocol () {
# Translate the protocol name to a number, because "iptables -n -L" prints
# some protocols by name (despite the -n) and therefore we need to look for
# both forms.
#
# (iptables -S output is more uniform but old iptables doesn't have it.)
protonum=`grep "^$PROTOCOL[ ]" /etc/protocols | awk '{print $2}'`
if expr X"$protonum" : X'[0-9]\{1,\}$' > /dev/null; then :; else
log_failure_msg "unknown protocol $PROTOCOL"
return 1
fi
name=$PROTOCOL
match="(\$2 == \"$PROTOCOL\" || \$2 == $protonum)"
insert="iptables -I INPUT -p $PROTOCOL"
if test X"$DPORT" != X; then
name="$name to port $DPORT"
match="$match && /dpt:$DPORT/"
insert="$insert --dport $DPORT"
fi
if test X"$SPORT" != X; then
name="$name from port $SPORT"
match="$match && /spt:$SPORT/"
insert="$insert --sport $SPORT"
fi
insert="$insert -j ACCEPT"
if (iptables -n -L INPUT) >/dev/null 2>&1; then
if iptables -n -L INPUT | awk "$match { n++ } END { exit n == 0 }"
then
# There's already a rule for this protocol. Don't override it.
log_success_msg "iptables already has a rule for $name, not explicitly enabling"
else
action "Enabling $name with iptables" $insert
fi
elif (iptables --version) >/dev/null 2>&1; then
action "cannot list iptables rules, not adding a rule for $name"
else
action "iptables binary not installed, not adding a rule for $name"
fi
}
## ---- ##
## main ##
## ---- ##
set_defaults () {
SYSTEM_ID=
FULL_HOSTNAME=yes
RECORD_HOSTNAME=yes
DELETE_BRIDGES=no
DELETE_TRANSIENT_PORTS=no
DAEMON_CWD=/
FORCE_COREFILES=yes
DUMP_HUGEPAGES=no
MLOCKALL=yes
SELF_CONFINEMENT=yes
MONITOR=yes
OVS_USER=
OVSDB_SERVER=yes
OVS_VSWITCHD=yes
OVSDB_SERVER_PRIORITY=-10
OVS_VSWITCHD_PRIORITY=-10
OVSDB_SERVER_WRAPPER=
OVS_VSWITCHD_WRAPPER=
OVSDB_SERVER_OPTIONS=
OVS_VSWITCHD_OPTIONS=
OVSDB_SERVER_UMASK=
OVS_VSWITCHD_UMASK=
DB_FILE=$dbdir/conf.db
DB_SOCK=$rundir/db.sock
DB_SCHEMA=$datadir/vswitch.ovsschema
EXTRA_DBS=
PROTOCOL=gre
DPORT=
SPORT=
IKE_DAEMON=
RESTART_IKE_DAEMON=yes
type_file=$etcdir/system-type.conf
version_file=$etcdir/system-version.conf
if test -e "$type_file" ; then
SYSTEM_TYPE=`cat $type_file`
SYSTEM_VERSION=`cat $version_file`
elif test -e "/etc/os-release"; then
SYSTEM_TYPE=`. '/etc/os-release' && echo "$ID"`
SYSTEM_VERSION=`. '/etc/os-release' && echo "$VERSION_ID"`
elif (lsb_release --id) >/dev/null 2>&1; then
SYSTEM_TYPE=`lsb_release --id -s`
system_release=`lsb_release --release -s`
system_codename=`lsb_release --codename -s`
SYSTEM_VERSION="${system_release}-${system_codename}"
else
SYSTEM_TYPE=unknown
SYSTEM_VERSION=unknown
fi
}
usage () {
set_defaults
cat <<EOF
$0: controls Open vSwitch daemons
usage: $0 [OPTIONS] COMMAND
This program is intended to be invoked internally by Open vSwitch startup
scripts. System administrators should not normally invoke it directly.
Commands:
start start Open vSwitch daemons
stop stop Open vSwitch daemons
restart stop and start Open vSwitch daemons
status check whether Open vSwitch daemons are running
version print versions of Open vSwitch daemons
load-kmod insert modules if not already present
force-reload-kmod save OVS network device state, stop OVS, unload
kernel module, reload kernel module, start OVS,
restore state
enable-protocol enable protocol specified in options with
iptables
delete-transient-ports delete transient (other_config:transient=true)
ports
start-ovs-ipsec start Open vSwitch ipsec daemon
stop-ovs-ipsec stop Open vSwitch ipsec daemon
record-hostname-if-not-set determine the system hostname and record it in
the Open vSwitch database if not already set
help display this help message
One of the following options is required for "start", "restart" and "force-reload-kmod":
--system-id=UUID set specific ID to uniquely identify this system
--system-id=random use a random but persistent UUID to identify this system
Other important options for "start", "restart" and "force-reload-kmod":
--system-type=TYPE set system type (e.g. "KVM")
--system-version=VERSION set system version (e.g. "4.18.el8_6")
--external-id="key=value"
add given key-value pair to Open_vSwitch external-ids
--delete-bridges delete all bridges just before starting ovs-vswitchd
--ovs-user="user[:group]" pass the --user flag to ovs daemons
--ovsdb-server-umask=MODE Set umask prior to run ovsdb-server daemon.
This is useful to manage daemon's sockets permissions.
Default is not to change umask (inherited from shell).
--ovs-vswitchd-umask=MODE Set umask prior to run ovs-vswitchd daemon.
This is useful to manage daemon's sockets permissions.
Default is not to change umask (inherited from shell).
Less important options for "start", "restart" and "force-reload-kmod":
--daemon-cwd=DIR set working dir for OVS daemons (default: $DAEMON_CWD)
--no-force-corefiles do not force on core dumps for OVS daemons
--dump-hugepages include hugepages in core dumps
--no-mlockall do not lock all of ovs-vswitchd into memory
--ovsdb-server-priority=NICE set ovsdb-server's niceness (default: $OVSDB_SERVER_PRIORITY)
--ovsdb-server-options=OPTIONS additional options for ovsdb-server (example: '-vconsole:dbg -vfile:dbg')
--ovs-vswitchd-priority=NICE set ovs-vswitchd's niceness (default: $OVS_VSWITCHD_PRIORITY)
--ovs-vswitchd-options=OPTIONS additional options for ovs-vswitchd (example: '-vconsole:dbg -vfile:dbg')
--no-full-hostname set short hostname instead of full hostname
--no-record-hostname do not attempt to determine/record system
hostname as part of start command
Debugging options for "start", "restart" and "force-reload-kmod":
--ovsdb-server-wrapper=WRAPPER
--ovs-vswitchd-wrapper=WRAPPER
run specified daemon under WRAPPER (either 'valgrind' or 'strace')
File location options:
--db-file=FILE database file name (default: $DB_FILE)
--db-sock=SOCKET JSON-RPC socket name (default: $DB_SOCK)
--db-schema=FILE database schema file name (default: $DB_SCHEMA)
Options for "enable-protocol":
--protocol=PROTOCOL protocol to enable with iptables (default: gre)
--sport=PORT source port to match (for tcp or udp protocol)
--dport=PORT ddestination port to match (for tcp or udp protocol)
Option for "start-ovs-ipsec":
--ike-daemon=IKE_DAEMON
the IKE daemon for ipsec tunnels (either libreswan or strongswan)
--no-restart-ike-daemon
do not restart the IKE daemon on startup
Other options:
-h, --help display this help message
-V, --version display version information
Default directories with "configure" option and environment variable override:
logs: /var/log/openvswitch (--with-logdir, OVS_LOGDIR)
pidfiles and sockets: /var/run/openvswitch (--with-rundir, OVS_RUNDIR)
conf.db: /etc/openvswitch (--with-dbdir, OVS_DBDIR)
system configuration: /etc (--sysconfdir, OVS_SYSCONFDIR)
data files: /share/openvswitch (--pkgdatadir, OVS_PKGDATADIR)
user binaries: /bin (--bindir, OVS_BINDIR)
system binaries: /sbin (--sbindir, OVS_SBINDIR)
Please report bugs to bugs@openvswitch.org (see REPORTING-BUGS for details).
EOF
exit 0
}
set_option () {
var=`echo "$option" | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
eval set=\${$var+yes}
eval old_value=\$$var
if test X$set = X || \
(test $type = bool && \
test X"$old_value" != Xno && test X"$old_value" != Xyes); then
echo >&2 "$0: unknown option \"$arg\" (use --help for help)"
return
fi
eval $var=\$value
}
daemons () {
echo ovsdb-server ovs-vswitchd
}
set_defaults
extra_ids=
command=
for arg
do
case $arg in
-h | --help)
usage
;;
-V | --version)
echo "$0 (Open vSwitch) $VERSION"
exit 0
;;
--external-id=*)
value=`expr X"$arg" : 'X[^=]*=\(.*\)'`
case $value in
*=*)
extra_ids="$extra_ids external-ids:$value"
;;
*)
echo >&2 "$0: --external-id argument not in the form \"key=value\""
exit 1
;;
esac
;;
--[a-z]*=*)
option=`expr X"$arg" : 'X--\([^=]*\)'`
value=`expr X"$arg" : 'X[^=]*=\(.*\)'`
type=string
set_option
;;
--no-[a-z]*)
option=`expr X"$arg" : 'X--no-\(.*\)'`
value=no
type=bool
set_option
;;
--[a-z]*)
option=`expr X"$arg" : 'X--\(.*\)'`
value=yes
type=bool
set_option
;;
-*)
echo >&2 "$0: unknown option \"$arg\" (use --help for help)"
exit 1
;;
*)
if test X"$command" = X; then
command=$arg
else
echo >&2 "$0: exactly one non-option argument required (use --help for help)"
exit 1
fi
;;
esac
done
case $command in
start)
start_ovsdb || exit 1
start_forwarding || exit 1
add_managers
;;
stop)
stop_forwarding
stop_ovsdb
;;
restart)
restart
;;
status)
rc=0
for daemon in `daemons`; do
daemon_status $daemon || rc=$?
done
exit $rc
;;
version)
for daemon in `daemons`; do
$daemon --version
done
;;
force-reload-kmod)
force_reload_kmod
;;
load-kmod)
insert_mod_if_required
;;
enable-protocol)
enable_protocol
;;
delete-transient-ports)
del_transient_ports
;;
start-ovs-ipsec)
start_ovs_ipsec
;;
stop-ovs-ipsec)
stop_ovs_ipsec
;;
record-hostname-if-not-set)
set_hostname
;;
help)
usage
;;
'')
echo >&2 "$0: missing command name (use --help for help)"
exit 1
;;
*)
echo >&2 "$0: unknown command \"$command\" (use --help for help)"
exit 1
;;
esac
Mini Shell