Current File : //proc/thread-self/root/usr/share/vim/vim82/doc/testing.txt
*testing.txt* For Vim version 8.2. Last change: 2021 Dec 11
VIM REFERENCE MANUAL by Bram Moolenaar
Testing Vim and Vim script *testing-support*
Expression evaluation is explained in |eval.txt|. This file goes into details
about writing tests in Vim script. This can be used for testing Vim itself
and for testing plugins.
1. Testing Vim |testing|
2. Test functions |test-functions-details|
3. Assert functions |assert-functions-details|
==============================================================================
1. Testing Vim *testing*
Vim can be tested after building it, usually with "make test".
The tests are located in the directory "src/testdir".
There are two types of tests added over time:
test20.in oldest, only for tiny and small builds
test_something.vim new style tests
*new-style-testing*
New tests should be added as new style tests. The test scripts are named
test_<feature>.vim (replace <feature> with the feature under test). These use
functions such as |assert_equal()| to keep the test commands and the expected
result in one place.
*old-style-testing*
These tests are used only for testing Vim without the |+eval| feature.
Find more information in the file src/testdir/README.txt.
==============================================================================
2. Test functions *test-functions-details*
test_alloc_fail({id}, {countdown}, {repeat}) *test_alloc_fail()*
This is for testing: If the memory allocation with {id} is
called, then decrement {countdown}, and when it reaches zero
let memory allocation fail {repeat} times. When {repeat} is
smaller than one it fails one time.
Can also be used as a |method|: >
GetAllocId()->test_alloc_fail()
test_autochdir() *test_autochdir()*
Set a flag to enable the effect of 'autochdir' before Vim
startup has finished.
test_feedinput({string}) *test_feedinput()*
Characters in {string} are queued for processing as if they
were typed by the user. This uses a low level input buffer.
This function works only when with |+unix| or GUI is running.
Can also be used as a |method|: >
GetText()->test_feedinput()
test_garbagecollect_now() *test_garbagecollect_now()*
Like garbagecollect(), but executed right away. This must
only be called directly to avoid any structure to exist
internally, and |v:testing| must have been set before calling
any function. This will not work when called from a :def
function, because variables on the stack will be freed.
test_garbagecollect_soon() *test_garbagecollect_soon()*
Set the flag to call the garbagecollector as if in the main
loop. Only to be used in tests.
test_getvalue({name}) *test_getvalue()*
Get the value of an internal variable. These values for
{name} are supported:
need_fileinfo
Can also be used as a |method|: >
GetName()->test_getvalue()
<
*test_gui_drop_files()*
test_gui_drop_files({list}, {row}, {col}, {mods})
Drop one or more files in {list} in the window at {row}, {col}.
This function only works when the GUI is running and the
|drop_file| feature is present.
The supported values for {mods} are:
0x4 Shift
0x8 Alt
0x10 Ctrl
The files are added to the |argument-list| and the first file
in {list} is edited in the window. See |drag-n-drop| for more
information.
*test_gui_mouse_event()*
test_gui_mouse_event({button}, {row}, {col}, {multiclick}, {modifiers})
Inject a mouse button click event. This function only works
when the GUI is running.
The supported values for {button} are:
0 right mouse button
1 middle mouse button
2 left mouse button
3 mouse button release
4 scroll wheel down
5 scroll wheel up
6 scroll wheel left
7 scroll wheel right
{row} and {col} specify the location of the mouse click. The
first row of the Vim window is 1 and the last row is 'lines'.
The maximum value of {col} is 'columns'.
To inject a multiclick event, set {multiclick} to 1.
The supported values for {modifiers} are:
4 shift is pressed
8 alt is pressed
16 ctrl is pressed
After injecting the mouse event you probably should call
|feedkeys()| to have them processed, e.g.: >
call feedkeys("y", 'Lx!')
test_ignore_error({expr}) *test_ignore_error()*
Ignore any error containing {expr}. A normal message is given
instead.
This is only meant to be used in tests, where catching the
error with try/catch cannot be used (because it skips over
following code).
{expr} is used literally, not as a pattern.
When the {expr} is the string "RESET" then the list of ignored
errors is made empty.
Can also be used as a |method|: >
GetErrorText()->test_ignore_error()
test_null_blob() *test_null_blob()*
Return a |Blob| that is null. Only useful for testing.
test_null_channel() *test_null_channel()*
Return a |Channel| that is null. Only useful for testing.
{only available when compiled with the +channel feature}
test_null_dict() *test_null_dict()*
Return a |Dict| that is null. Only useful for testing.
test_null_function() *test_null_function()*
Return a |Funcref| that is null. Only useful for testing.
test_null_job() *test_null_job()*
Return a |Job| that is null. Only useful for testing.
{only available when compiled with the +job feature}
test_null_list() *test_null_list()*
Return a |List| that is null. Only useful for testing.
test_null_partial() *test_null_partial()*
Return a |Partial| that is null. Only useful for testing.
test_null_string() *test_null_string()*
Return a |String| that is null. Only useful for testing.
test_option_not_set({name}) *test_option_not_set()*
Reset the flag that indicates option {name} was set. Thus it
looks like it still has the default value. Use like this: >
set ambiwidth=double
call test_option_not_set('ambiwidth')
< Now the 'ambiwidth' option behaves like it was never changed,
even though the value is "double".
Only to be used for testing!
Can also be used as a |method|: >
GetOptionName()->test_option_not_set()
test_override({name}, {val}) *test_override()*
Overrides certain parts of Vim's internal processing to be able
to run tests. Only to be used for testing Vim!
The override is enabled when {val} is non-zero and removed
when {val} is zero.
Current supported values for name are:
name effect when {val} is non-zero ~
redraw disable the redrawing() function
redraw_flag ignore the RedrawingDisabled flag
char_avail disable the char_avail() function
starting reset the "starting" variable, see below
nfa_fail makes the NFA regexp engine fail to force a
fallback to the old engine
no_query_mouse do not query the mouse position for "dec"
terminals
no_wait_return set the "no_wait_return" flag. Not restored
with "ALL".
ui_delay time in msec to use in ui_delay(); overrules a
wait time of up to 3 seconds for messages
term_props reset all terminal properties when the version
string is detected
uptime overrules sysinfo.uptime
ALL clear all overrides ({val} is not used)
"starting" is to be used when a test should behave like
startup was done. Since the tests are run by sourcing a
script the "starting" variable is non-zero. This is usually a
good thing (tests run faster), but sometimes changes behavior
in a way that the test doesn't work properly.
When using: >
call test_override('starting', 1)
< The value of "starting" is saved. It is restored by: >
call test_override('starting', 0)
< Can also be used as a |method|: >
GetOverrideVal()-> test_override('starting')
test_refcount({expr}) *test_refcount()*
Return the reference count of {expr}. When {expr} is of a
type that does not have a reference count, returns -1. Only
to be used for testing.
Can also be used as a |method|: >
GetVarname()->test_refcount()
test_scrollbar({which}, {value}, {dragging}) *test_scrollbar()*
Pretend using scrollbar {which} to move it to position
{value}. {which} can be:
left Left scrollbar of the current window
right Right scrollbar of the current window
hor Horizontal scrollbar
For the vertical scrollbars {value} can be 1 to the
line-count of the buffer. For the horizontal scrollbar the
{value} can be between 1 and the maximum line length, assuming
'wrap' is not set.
When {dragging} is non-zero it's like dragging the scrollbar,
otherwise it's like clicking in the scrollbar.
Only works when the {which} scrollbar actually exists,
obviously only when using the GUI.
Can also be used as a |method|: >
GetValue()->test_scrollbar('right', 0)
test_setmouse({row}, {col}) *test_setmouse()*
Set the mouse position to be used for the next mouse action.
{row} and {col} are one based.
For example: >
call test_setmouse(4, 20)
call feedkeys("\<LeftMouse>", "xt")
test_settime({expr}) *test_settime()*
Set the time Vim uses internally. Currently only used for
timestamps in the history, as they are used in viminfo, and
for undo.
Using a value of 1 makes Vim not sleep after a warning or
error message.
{expr} must evaluate to a number. When the value is zero the
normal behavior is restored.
Can also be used as a |method|: >
GetTime()->test_settime()
test_srand_seed([seed]) *test_srand_seed()*
When [seed] is given this sets the seed value used by
`srand()`. When omitted the test seed is removed.
test_unknown() *test_unknown()*
Return a value with unknown type. Only useful for testing.
test_void() *test_void()*
Return a value with void type. Only useful for testing.
==============================================================================
3. Assert functions *assert-functions-details*
assert_beeps({cmd}) *assert_beeps()*
Run {cmd} and add an error message to |v:errors| if it does
NOT produce a beep or visual bell.
Also see |assert_fails()|, |assert_nobeep()| and
|assert-return|.
Can also be used as a |method|: >
GetCmd()->assert_beeps()
<
*assert_equal()*
assert_equal({expected}, {actual} [, {msg}])
When {expected} and {actual} are not equal an error message is
added to |v:errors| and 1 is returned. Otherwise zero is
returned |assert-return|.
There is no automatic conversion, the String "4" is different
from the Number 4. And the number 4 is different from the
Float 4.0. The value of 'ignorecase' is not used here, case
always matters.
When {msg} is omitted an error in the form "Expected
{expected} but got {actual}" is produced.
Example: >
assert_equal('foo', 'bar')
< Will result in a string to be added to |v:errors|:
test.vim line 12: Expected 'foo' but got 'bar' ~
Can also be used as a |method|, the base is passed as the
second argument: >
mylist->assert_equal([1, 2, 3])
< *assert_equalfile()*
assert_equalfile({fname-one}, {fname-two} [, {msg}])
When the files {fname-one} and {fname-two} do not contain
exactly the same text an error message is added to |v:errors|.
Also see |assert-return|.
When {fname-one} or {fname-two} does not exist the error will
mention that.
Mainly useful with |terminal-diff|.
Can also be used as a |method|: >
GetLog()->assert_equalfile('expected.log')
assert_exception({error} [, {msg}]) *assert_exception()*
When v:exception does not contain the string {error} an error
message is added to |v:errors|. Also see |assert-return|.
This can be used to assert that a command throws an exception.
Using the error number, followed by a colon, avoids problems
with translations: >
try
commandthatfails
call assert_false(1, 'command should have failed')
catch
call assert_exception('E492:')
endtry
<
*assert_fails()*
assert_fails({cmd} [, {error} [, {msg} [, {lnum} [, {context}]]]])
Run {cmd} and add an error message to |v:errors| if it does
NOT produce an error or when {error} is not found in the
error message. Also see |assert-return|.
When {error} is a string it must be found literally in the
first reported error. Most often this will be the error code,
including the colon, e.g. "E123:". >
assert_fails('bad cmd', 'E987:')
<
When {error} is a |List| with one or two strings, these are
used as patterns. The first pattern is matched against the
first reported error: >
assert_fails('cmd', ['E987:.*expected bool'])
< The second pattern, if present, is matched against the last
reported error.
If there is only one error then both patterns must match. This
can be used to check that there is only one error.
To only match the last error use an empty string for the first
error: >
assert_fails('cmd', ['', 'E987:'])
<
If {msg} is empty then it is not used. Do this to get the
default message when passing the {lnum} argument.
When {lnum} is present and not negative, and the {error}
argument is present and matches, then this is compared with
the line number at which the error was reported. That can be
the line number in a function or in a script.
When {context} is present it is used as a pattern and matched
against the context (script name or function name) where
{lnum} is located in.
Note that beeping is not considered an error, and some failing
commands only beep. Use |assert_beeps()| for those.
Can also be used as a |method|: >
GetCmd()->assert_fails('E99:')
assert_false({actual} [, {msg}]) *assert_false()*
When {actual} is not false an error message is added to
|v:errors|, like with |assert_equal()|.
Also see |assert-return|.
A value is false when it is zero. When {actual} is not a
number the assert fails.
When {msg} is omitted an error in the form
"Expected False but got {actual}" is produced.
Can also be used as a |method|: >
GetResult()->assert_false()
assert_inrange({lower}, {upper}, {actual} [, {msg}]) *assert_inrange()*
This asserts number and |Float| values. When {actual} is lower
than {lower} or higher than {upper} an error message is added
to |v:errors|. Also see |assert-return|.
When {msg} is omitted an error in the form
"Expected range {lower} - {upper}, but got {actual}" is
produced.
*assert_match()*
assert_match({pattern}, {actual} [, {msg}])
When {pattern} does not match {actual} an error message is
added to |v:errors|. Also see |assert-return|.
{pattern} is used as with |=~|: The matching is always done
like 'magic' was set and 'cpoptions' is empty, no matter what
the actual value of 'magic' or 'cpoptions' is.
{actual} is used as a string, automatic conversion applies.
Use "^" and "$" to match with the start and end of the text.
Use both to match the whole text.
When {msg} is omitted an error in the form
"Pattern {pattern} does not match {actual}" is produced.
Example: >
assert_match('^f.*o$', 'foobar')
< Will result in a string to be added to |v:errors|:
test.vim line 12: Pattern '^f.*o$' does not match 'foobar' ~
Can also be used as a |method|: >
getFile()->assert_match('foo.*')
<
assert_nobeep({cmd}) *assert_nobeep()*
Run {cmd} and add an error message to |v:errors| if it
produces a beep or visual bell.
Also see |assert_beeps()|.
Can also be used as a |method|: >
GetCmd()->assert_nobeep()
<
*assert_notequal()*
assert_notequal({expected}, {actual} [, {msg}])
The opposite of `assert_equal()`: add an error message to
|v:errors| when {expected} and {actual} are equal.
Also see |assert-return|.
Can also be used as a |method|: >
mylist->assert_notequal([1, 2, 3])
< *assert_notmatch()*
assert_notmatch({pattern}, {actual} [, {msg}])
The opposite of `assert_match()`: add an error message to
|v:errors| when {pattern} matches {actual}.
Also see |assert-return|.
Can also be used as a |method|: >
getFile()->assert_notmatch('bar.*')
assert_report({msg}) *assert_report()*
Report a test failure directly, using String {msg}.
Always returns one.
Can also be used as a |method|: >
GetMessage()->assert_report()
assert_true({actual} [, {msg}]) *assert_true()*
When {actual} is not true an error message is added to
|v:errors|, like with |assert_equal()|.
Also see |assert-return|.
A value is TRUE when it is a non-zero number. When {actual}
is not a number the assert fails.
When {msg} is omitted an error in the form "Expected True but
got {actual}" is produced.
Can also be used as a |method|: >
GetResult()->assert_true()
<
vim:tw=78:ts=8:noet:ft=help:norl:
Mini Shell