%PDF-
%PDF-
Mini Shell
Mini Shell
#!/usr/bin/perl
#
# This script parses the default logfile format produced by rsync when running
# as a daemon with transfer logging enabled. It also parses a slightly tweaked
# version of the default format where %o has been replaced with %i.
#
# This script is derived from the xferstats script that comes with wuftpd. See
# the usage message at the bottom for the options it takes.
#
# Andrew Tridgell, October 1998
use Getopt::Long;
# You may wish to edit the next line to customize for your default log file.
$usage_file = "/var/log/rsyncd.log";
# Edit the following lines for default report settings.
# Entries defined here will be over-ridden by the command line.
$hourly_report = 0;
$domain_report = 0;
$total_report = 0;
$depth_limit = 9999;
$only_section = '';
&Getopt::Long::Configure('bundling');
&usage if !&GetOptions(
'hourly-report|h' => \$hourly_report,
'domain-report|d' => \$domain_report,
'domain|D:s' => \$only_domain,
'total-report|t' => \$total_report,
'depth-limit|l:i' => \$depth_limit,
'real|r' => \$real,
'anon|a' => \$anon,
'section|s:s' => \$only_section,
'file|f:s' => \$usage_file,
);
$anon = 1 if !$real && !$anon;
open(LOG, $usage_file) || die "Error opening usage log file: $usage_file\n";
if ($only_domain) {
print "Transfer Totals include the '$only_domain' domain only.\n";
print "All other domains are filtered out for this report.\n\n";
}
if ($only_section) {
print "Transfer Totals include the '$only_section' section only.\n";
print "All other sections are filtered out for this report.\n\n";
}
line: while (<LOG>) {
my $syslog_prefix = '\w\w\w +\d+ \d\d:\d\d:\d\d \S+ rsyncd';
my $rsyncd_prefix = '\d\d\d\d/\d\d/\d\d \d\d:\d\d:\d\d ';
next unless ($day,$time,$op,$host,$module,$file,$bytes)
= m{^
( \w\w\w\s+\d+ | \d+/\d\d/\d\d ) \s+ # day
(\d\d:\d\d:\d\d) \s+ # time
[^[]* \[\d+\]:? \s+ # pid (ignored)
(send|recv|[<>]f\S+) \s+ # op (%o or %i)
(\S+) \s+ # host
\[\d+\.\d+\.\d+\.\d+\] \s+ # IP (ignored)
(\S+) \s+ # module
\(\S*\) \s+ # user (ignored)
(.*) \s+ # file name
(\d+) # file length in bytes
$ }x;
# TODO actually divide the data by into send/recv categories
if ($op =~ /^>/) {
$op = 'send';
} elsif ($op =~ /^</) {
$op = 'recv';
}
$daytime = $day;
$hour = substr($time,0,2);
$file = $module . "/" . $file;
$file =~ s|//|/|mg;
@path = split(/\//, $file);
$pathkey = "";
for ($i=0; $i <= $#path && $i <= $depth_limit; $i++) {
$pathkey = $pathkey . "/" . $path[$i];
}
if ($only_section ne '') {
next unless (substr($pathkey,0,length($only_section)) eq $only_section);
}
$host =~ tr/A-Z/a-z/;
@address = split(/\./, $host);
$domain = $address[$#address];
if ( int($address[0]) > 0 || $#address < 2 )
{ $domain = "unresolved"; }
if ($only_domain ne '') {
next unless (substr($domain,0,length($only_domain)) eq $only_domain);
}
# printf("c=%d day=%s bytes=%d file=%s path=%s\n",
# $#line, $daytime, $bytes, $file, $pathkey);
$xferfiles++; # total files sent
$xfertfiles++; # total files sent
$xferfiles{$daytime}++; # files per day
$groupfiles{$pathkey}++; # per-group accesses
$domainfiles{$domain}++;
$xferbytes{$daytime} += $bytes; # bytes per day
$domainbytes{$domain} += $bytes; # xmit bytes to domain
$xferbytes += $bytes; # total bytes sent
$groupbytes{$pathkey} += $bytes; # per-group bytes sent
$xfertfiles{$hour}++; # files per hour
$xfertbytes{$hour} += $bytes; # bytes per hour
$xfertbytes += $bytes; # total bytes sent
}
close LOG;
#@syslist = keys %systemfiles;
@dates = sort datecompare keys %xferbytes;
if ($xferfiles == 0) {die "There was no data to process.\n";}
print "TOTALS FOR SUMMARY PERIOD ", $dates[0], " TO ", $dates[$#dates], "\n\n";
printf("Files Transmitted During Summary Period %12.0f\n", $xferfiles);
printf("Bytes Transmitted During Summary Period %12.0f\n", $xferbytes);
#printf("Systems Using Archives %12.0f\n\n", $#syslist+1);
printf("Average Files Transmitted Daily %12.0f\n",
$xferfiles / ($#dates + 1));
printf("Average Bytes Transmitted Daily %12.0f\n",
$xferbytes / ($#dates + 1));
format top1 =
Daily Transmission Statistics
Number Of Number of Percent Of Percent Of
Date Files Sent MB Sent Files Sent Bytes Sent
--------------- ---------- ----------- ---------- ----------
.
format line1 =
@<<<<<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>> @>>>>>>> @>>>>>>>
$date, $nfiles, $nbytes/(1024*1024), $pctfiles, $pctbytes
.
$^ = top1;
$~ = line1;
foreach $date (sort datecompare keys %xferbytes) {
$nfiles = $xferfiles{$date};
$nbytes = $xferbytes{$date};
$pctfiles = sprintf("%8.2f", 100*$xferfiles{$date} / $xferfiles);
$pctbytes = sprintf("%8.2f", 100*$xferbytes{$date} / $xferbytes);
write;
}
if ($total_report) {
format top2 =
Total Transfers from each Archive Section (By bytes)
- Percent -
Archive Section NFiles MB Files Bytes
------------------------------------- ------- ----------- ----- -------
.
format line2 =
@<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @>>>>>> @>>>>>>>>>> @>>>> @>>>>
$section, $files, $bytes/(1024*1024), $pctfiles, $pctbytes
.
$| = 1;
$- = 0;
$^ = top2;
$~ = line2;
foreach $section (sort bytecompare keys %groupfiles) {
$files = $groupfiles{$section};
$bytes = $groupbytes{$section};
$pctbytes = sprintf("%8.2f", 100 * $groupbytes{$section} / $xferbytes);
$pctfiles = sprintf("%8.2f", 100 * $groupfiles{$section} / $xferfiles);
write;
}
if ( $xferfiles < 1 ) { $xferfiles = 1; }
if ( $xferbytes < 1 ) { $xferbytes = 1; }
}
if ($domain_report) {
format top3 =
Total Transfer Amount By Domain
Number Of Number of Percent Of Percent Of
Domain Name Files Sent MB Sent Files Sent Bytes Sent
----------- ---------- ------------ ---------- ----------
.
format line3 =
@<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>>> @>>>>>>> @>>>>>>>
$domain, $files, $bytes/(1024*1024), $pctfiles, $pctbytes
.
$- = 0;
$^ = top3;
$~ = line3;
foreach $domain (sort domnamcompare keys %domainfiles) {
if ( $domainsecs{$domain} < 1 ) { $domainsecs{$domain} = 1; }
$files = $domainfiles{$domain};
$bytes = $domainbytes{$domain};
$pctfiles = sprintf("%8.2f", 100 * $domainfiles{$domain} / $xferfiles);
$pctbytes = sprintf("%8.2f", 100 * $domainbytes{$domain} / $xferbytes);
write;
}
}
if ($hourly_report) {
format top8 =
Hourly Transmission Statistics
Number Of Number of Percent Of Percent Of
Time Files Sent MB Sent Files Sent Bytes Sent
--------------- ---------- ----------- ---------- ----------
.
format line8 =
@<<<<<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>> @>>>>>>> @>>>>>>>
$hour, $nfiles, $nbytes/(1024*1024), $pctfiles, $pctbytes
.
$| = 1;
$- = 0;
$^ = top8;
$~ = line8;
foreach $hour (sort keys %xfertbytes) {
$nfiles = $xfertfiles{$hour};
$nbytes = $xfertbytes{$hour};
$pctfiles = sprintf("%8.2f", 100*$xfertfiles{$hour} / $xferfiles);
$pctbytes = sprintf("%8.2f", 100*$xfertbytes{$hour} / $xferbytes);
write;
}
}
exit(0);
sub datecompare {
$a cmp $b;
}
sub domnamcompare {
$sdiff = length($a) - length($b);
($sdiff < 0) ? -1 : ($sdiff > 0) ? 1 : $a cmp $b;
}
sub bytecompare {
$bdiff = $groupbytes{$b} - $groupbytes{$a};
($bdiff < 0) ? -1 : ($bdiff > 0) ? 1 : $a cmp $b;
}
sub faccompare {
$fdiff = $fac{$b} - $fac{$a};
($fdiff < 0) ? -1 : ($fdiff > 0) ? 1 : $a cmp $b;
}
sub usage
{
die <<EOT;
USAGE: rsyncstats [options]
OPTIONS:
-f FILENAME Use FILENAME for the log file.
-h Include report on hourly traffic.
-d Include report on domain traffic.
-t Report on total traffic by section.
-D DOMAIN Report only on traffic from DOMAIN.
-l DEPTH Set DEPTH of path detail for sections.
-s SECTION Set SECTION to report on. For example, "-s /pub"
will report only on paths under "/pub".
EOT
}
Zerion Mini Shell 1.0