Current File : //proc/thread-self/root/proc/self/root/sbin/usb_modeswitch_dispatcher
#!/usr/bin/tclsh
# Wrapper (tcl) for usb_modeswitch, called from
# /lib/udev/rules.d/40-usb_modeswitch.rules
# (part of data pack "usb-modeswitch-data") via
# /lib/udev/usb_modeswitch
#
# Does ID check on newly discovered USB devices and calls
# the mode switching program with the matching parameter
# file from /usr/share/usb_modeswitch
#
# Part of usb-modeswitch-2.6.1 package, 2020/07/10
# (C) Josua Dietze 2009 - 2020
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details:
#
# http://www.gnu.org/licenses/gpl.txt
set arg0 [lindex $argv 0]
if [regexp {\.tcl$} $arg0] {
if [file exists $arg0] {
set argv [lrange $argv 1 end]
source $arg0
exit
}
}
# Setting of these switches is done in the global config
# file (/etc/usb_modeswitch.conf) if available
set flags(logging) 0
set flags(noswitching) 0
set flags(stordelay) 0
set flags(nombim) 0
set flags(logwrite) 0
# also settable in device config files
set flags(nombim) 0
set flags(althuawei) 0
# Execution starts at file bottom
proc {Main} {argv argc} {
global scsi usb config match device flags setup devdir loginit
set flags(config) ""
# arg0: optional custom location of configuration file
# arg1: the "kernel name" for the device to switch (udev: %k)
# The parameter "bus id" for the device (udev: %b) is now deprecated
#
# From version 2.5.0 upward %b is removed by udev sh script
# which can handle old and new udev params ('%b/%k' and '%k')
Log "Raw parameters: $argv"
set device "noname"
set arg0 ""
for {set i 0} {$i < [llength $argv]} {incr i} {
set option [lindex $argv $i]
switch -glob -- $option {
"--config-file" {
if [regexp {config-file=(\"[^\"]+\"|[^ ]+)} $option d param] {
set arg0 [string trim $param {"}]
} else {
set arg0 [lindex $argv $i+1]
}
}
"--switch-mode" {
if [regexp {switch-mode=(.+)} $option d param] {
set arg1 $param
} else {
set arg1 [lindex $argv $i+1]
}
}
}
}
Log "[ParseGlobalConfig $arg0]"
set flags(logwrite) 1
# The facility to add a symbolic link pointing to the
# ttyUSB port which provides interrupt transfer, i.e.
# the port to connect through.
# Will check for interrupt endpoint in ttyUSB port (lowest if
# there is more than one); if found, return "gsmmodem[n]" name
# to udev for symlink creation
# This is run once for every port of LISTED devices by
# a udev rule
if {[lindex $argv 0] == "--symlink-name"} {
puts -nonewline [SymLinkName [lindex $argv 1]]
SafeExit
}
if {$flags(stordelay) > 0} {
SetStorageDelay $flags(stordelay)
}
if [info exists arg1] {
if {[string length $arg1] == 0} {
ShowUsage
Log "\nNo device provided for mode-switching. Exit"
SafeExit
}
} else {
ShowUsage
Log "\nNo command option given. Exit"
SafeExit
}
if {![regexp {(.*?):.*$} $arg1 d device]} {
if {![regexp {([0-9]+-[0-9]+\.?[0-9]*.*)} $arg1 d device]} {
ShowUsage
Log "Could not determine device dir from udev values! Exit"
SafeExit
}
}
set setup(dbdir) /usr/share/usb_modeswitch
set setup(dbdir_etc) /etc/usb_modeswitch.d
if {![file exists $setup(dbdir)] && ![file exists $setup(dbdir_etc)]} {
Log "\nError: no config database found in /usr/share or /etc. Exit"
SafeExit
}
set bindir /usr/sbin
set devList1 {}
set devList2 {}
set ifChk 0
set devdir /sys/bus/usb/devices/$device
if {![file isdirectory $devdir]} {
Log "Top device directory not found ($devdir)! Exit"
SafeExit
}
Log "Use top device dir $devdir"
set iface 0
Log "Check class of first interface ..."
set config(class) [IfClass 0 $devdir]
if {$config(class) < 0} {
Log " No access to first interface. Exit"
SafeExit
}
Log " Interface class is $config(class)."
set ifdir [file tail [IfDir $iface $devdir]]
regexp {:([0-9]+\.[0-9]+)$} $ifdir d iface
# Mapping of the short string identifiers (in the config
# file names) to the long name used here
#
# If we need them it's a snap to add new attributes here!
set match(sVe) scsi(vendor)
set match(sMo) scsi(model)
set match(sRe) scsi(rev)
set match(uMa) usb(manufacturer)
set match(uPr) usb(product)
set match(uSe) usb(serial)
# Now reading the USB attributes
if {![ReadUSBAttrs $devdir]} {
Log "USB attributes not found in sysfs tree. Exit"
SafeExit
}
set config(vendor) $usb(idVendor)
set config(product) $usb(idProduct)
if $flags(logging) {
Log "\n----------------\nUSB values from sysfs:"
foreach attr {manufacturer product serial} {
Log " $attr\t$usb($attr)"
}
Log "----------------"
}
if $flags(noswitching) {
SysLog "usb_modeswitch: switching disabled, no action for $usb(idVendor):$usb(idProduct)"
Log "\nSwitching globally disabled. Exit"
SafeExit
}
if {$usb(bNumConfigurations) == "1"} {
set configParam "-u -1"
Log "bNumConfigurations is 1 - don't check for active configuration"
} else {
set configParam ""
}
# Check (and switch) for operating system if Huawei device present
set flags(os) "linux"
if {$usb(idVendor) == "12d1" && [regexp -nocase {android} [exec cat /proc/version]]} {
set flags(os) "android"
}
if {$flags(os) == "android"} {
set configList [ConfigGet conflist $usb(idVendor):#android]
} else {
set configList [ConfigGet conflist $usb(idVendor):$usb(idProduct)]
}
if {[llength $configList] == 0} {
Log "Aargh! Config file missing for $usb(idVendor):$usb(idProduct)! Exit"
SafeExit
}
Log "ConfigList: $configList"
# Check if there is more than one config file for this USB ID,
# which would make an attribute test necessary. If so, check if
# SCSI values are needed
set scsiNeeded 0
if {[llength $configList] > 1} {
if [regexp {:s} $configList] {
set scsiNeeded 1
}
}
if $scsiNeeded {
if [ReadSCSIAttrs $devdir:$iface] {
Log "----------------\nSCSI values from sysfs:"
foreach attr {vendor model rev} {
Log " $attr\t$scsi($attr)"
}
Log "----------------"
} else {
Log "Could not get SCSI attributes, exclude devices with SCSI match"
}
} else {
Log "SCSI attributes not needed, move on"
}
# Now check for a matching config file. Matching is done
# by MatchDevice
set report ""
foreach mconfig $configList {
# skipping installer leftovers like "*.rpmnew"
if [regexp {\.(dpkg|rpm)} $mconfig] {continue}
Log "Check config: $mconfig"
if [MatchDevice $mconfig] {
Log "! matched. Read config data"
set flags(config) [ConfigGet conffile $mconfig]
break
} else {
Log "* no match, don't use this config"
}
}
if {$flags(config) == ""} {
Log "No matching config file found. Exit"
SafeExit
}
ParseDeviceConfig $flags(config)
if [regexp -nocase {0x([0-9a-f]+)} $config(TargetClass) d tc] {
if {$tc == $config(class)} {
Log "Class of interface 0 matches target. Do nothing"
set report "ok:busdev"
}
}
if [string length $usb(busnum)] {
set busParam "-b [string trimleft $usb(busnum) 0]"
set devParam "-g [string trimleft $usb(devnum) 0]"
} else {
set busParam ""
set devParam ""
}
if [regexp -nocase $flags(os) $flags(config)] {
Log "Note: Using generic manufacturer configuration for \"$flags(os)\""
}
if $flags(althuawei) {
regsub {HuaweiNewMode} $flags(config) {HuaweiAltMode} flags(config)
Log "Alternative Huawei mode set globally, modify config"
}
if $flags(nombim) {
set config(NoMBIMCheck) 1
}
if {$config(NoMBIMCheck)==0 && $usb(bNumConfigurations) > 1} {
Log "Device may have an MBIM configuration, check driver ..."
if [CheckMBIM] {
Log " driver for MBIM devices is available"
Log "Find MBIM configuration number ..."
if [catch {set cfgno [exec /usr/sbin/usb_modeswitch -j -Q $busParam $devParam -v $usb(idVendor) -p $usb(idProduct)]} err] {
Log "Error when trying to find MBIM configuration, switch to legacy modem mode"
} else {
set cfgno [string trim $cfgno]
if {$cfgno > 0} {
set config(Configuration) $cfgno
set flags(config) "Configuration=$cfgno"
} else {
Log " No MBIM configuration found, switch to legacy modem mode"
}
}
} else {
Log " no MBIM driver found, switch to legacy modem mode"
}
}
if [PantechAutoSwitch] {
Log "Waiting for Pantech auto-modeswitch"
set report "ok:busdev"
}
if {$config(Configuration) == 0} {
Log "Config file contains dummy method, do nothing. Exit"
SafeExit
}
# General wait - some devices need this
after 500
if {$config(WaitBefore) != ""} {
Log "Delay time of $config(WaitBefore) seconds"
append config(WaitBefore) "000"
after $config(WaitBefore)
}
if {$report == ""} {
# Now we are actually switching
if $flags(logging) {
Log "Command line:\nusb_modeswitch -W -D $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f \$flags(config)"
catch {set report [exec /usr/sbin/usb_modeswitch -W -D $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f "$flags(config)" 2>@1]} report
Log "\nVerbose debug output of usb_modeswitch and libusb follows"
Log "(Note that some USB errors are to be expected in the process)"
Log "--------------------------------"
Log $report
Log "--------------------------------"
Log "(end of usb_modeswitch output)\n"
} else {
catch {set report [exec /usr/sbin/usb_modeswitch -Q -D $configParam $busParam $devParam -v $usb(idVendor) -p $usb(idProduct) -f "$flags(config)" 2>@1]} report
}
}
# Switching is complete; success checking was either
# done by usb_modeswitch and logged via syslog OR bus/dev
# parameter were used; then we do check for success HERE
if {$config(Configuration) != ""} {
set ifdir [regsub {(\d):\d+\.0} $ifdir "\\1:$config(Configuration).0"]
}
if [regexp {ok:busdev} $report] {
if [CheckSuccess $devdir] {
Log "Mode switching was successful, found $usb(idVendor):$usb(idProduct) ($usb(manufacturer): $usb(product))"
SysLog "usb_modeswitch: switched to $usb(idVendor):$usb(idProduct) on [format %03d $usb(busnum)]/[format %03d $usb(devnum)]"
} else {
Log "\nTarget config not matching - current values are"
LogAttributes
Log "\nMode switching may have failed. Exit"
SafeExit
}
} else {
if {![file isdirectory $devdir]} {
Log "Device directory in sysfs is gone! Something went wrong, abort"
SafeExit
}
if {![regexp {ok:} $report]} {
Log "\nCore program reported switching failure. Exit"
SafeExit
}
# Give the device another second if it's not fully back yet
if {![file exists $devdir/idProduct]} {
after 1000
}
ReadUSBAttrs $devdir $ifdir
}
# driver binding removed !!
if {[string length "$usb(idVendor)$usb(idProduct)"] < 8} {
if {![regexp {ok:(\w{4}):(\w{4})} $report d usb(idVendor) usb(idProduct)]} {
Log "No target vendor/product ID found or given, can't continue. Abort"
SafeExit
}
}
# wait for drivers to bind
after 500
if {[llength [glob -nocomplain $devdir/$ifdir/ttyUSB*]] > 0} {
Log "Serial USB driver bound to interface 0\n will try to guess and symlink modem port on next connect"
AddToList link_list $usb(idVendor):$usb(idProduct)
}
# In newer kernels there is a switch to avoid the use of a device
# reset (e.g. from usb-storage) which would possibly switch back
# a mode-switching device to initial mode
if [regexp {ok:} $report] {
Log "Check for AVOID_RESET_QUIRK kernel attribute"
if [file exists $devdir/avoid_reset_quirk] {
if [catch {exec echo "1" >$devdir/avoid_reset_quirk 2>/dev/null} err] {
Log " Error setting the attribute: $err"
} else {
Log " AVOID_RESET_QUIRK activated"
}
} else {
Log " not present in this kernel"
}
}
Log "\nAll done, exit\n"
SafeExit
}
# end of proc {Main}
proc {ReadSCSIAttrs} {topdir} {
global scsi
set counter 0
set sysdir $topdir
Log "Check storage tree in sysfs ..."
while {$counter < 20} {
Log " loop $counter/20"
if {![file isdirectory $sysdir]} {
# Device is gone. Unplugged? Switched by kernel?
Log " sysfs device tree is gone; abort SCSI value check"
return 0
}
# Searching the storage/SCSI tree; might take a while
if {[set dirList [glob -nocomplain $topdir/host*]] != ""} {
set sysdir [lindex $dirList 0]
if {[set dirList [glob -nocomplain $sysdir/target*]] != ""} {
set sysdir [lindex $dirList 0]
regexp {.*target(.*)} $sysdir d subdir
if {[set dirList [glob -nocomplain $sysdir/$subdir*]] != ""} {
set sysdir [lindex $dirList 0]
if [file exists $sysdir/vendor] {
Log " Storage tree is ready"
break
}
}
}
}
after 500
incr counter
}
if {$counter == 20} {
Log "SCSI tree not found; you may want to check if this path/file exists:"
Log "$sysdir/vendor\n"
return 0
}
Log "Read SCSI values ..."
foreach attr {vendor model rev} {
if [file exists $sysdir/$attr] {
set rc [open $sysdir/$attr r]
set scsi($attr) [read -nonewline $rc]
close $rc
} else {
set scsi($attr) ""
Log "Warning: SCSI attribute \"$attr\" not found."
}
}
return 1
}
# end of proc {ReadSCSIAttrs}
proc {ReadUSBAttrs} {dir args} {
global usb
set attrList {idVendor idProduct bConfigurationValue manufacturer product serial devnum busnum bNumConfigurations}
set mandatoryList {idVendor idProduct bNumConfigurations}
set result 1
if {$args != ""} {
lappend attrList "$args/bInterfaceClass"
lappend mandatoryList "$args/bInterfaceClass"
}
foreach attr $attrList {
if [file exists $dir/$attr] {
set rc [open $dir/$attr r]
set usb($attr) [string trim [read -nonewline $rc]]
close $rc
} else {
set usb($attr) ""
if {[lsearch $mandatoryList $attr] > -1} {
set result 0
}
if {$attr == "serial"} {continue}
Log " Warning: USB attribute \"$attr\" not found"
}
}
return $result
}
# end of proc {ReadUSBAttrs}
proc {MatchDevice} {config} {
global scsi usb match
set devinfo [file tail $config]
set infoList [split $devinfo :]
set stringList [lrange $infoList 2 end]
if {[llength $stringList] == 0} {return 1}
foreach teststring $stringList {
if {$teststring == "?"} {return 0}
set tokenList [split $teststring =]
set id [lindex $tokenList 0]
set matchstring [lindex $tokenList 1]
set blankstring ""
regsub -all {_} $matchstring { } blankstring
Log "match $match($id)"
Log " string1 (exact): $matchstring"
Log " string2 (blanks): $blankstring"
Log " device string: [set $match($id)]"
if {!([string match *$matchstring* [set $match($id)]] || [string match *$blankstring* [set $match($id)]])} {
return 0
}
}
return 1
}
# end of proc {MatchDevice}
proc {ParseGlobalConfig} {path} {
global flags
set configFile ""
if [string length $path] {
set places [list $path]
} else {
set places [list /etc/usb_modeswitch.conf /etc/sysconfig/usb_modeswitch /etc/default/usb_modeswitch]
}
foreach cfg $places {
if [file exists $cfg] {
set configFile $cfg
break
}
}
if {$configFile == ""} {return "No configuration file found, using defaults"}
set rc [open $configFile r]
while {![eof $rc]} {
gets $rc line
if [regexp {^#} [string trim $line]] {continue}
if [regexp {DisableMBIMGlobal\s*=\s*([^\s]+)} $line d val] {
set flags(nombim) [regexp -nocase {1|yes|true} $val]
}
if [regexp {DisableSwitching\s*=\s*([^\s]+)} $line d val] {
set flags(noswitching) [regexp -nocase {1|yes|true} $val]
}
if [regexp {EnableLogging\s*=\s*([^\s]+)} $line d val] {
set flags(logging) [regexp -nocase {1|yes|true} $val]
}
if [regexp {SetStorageDelay\s*=\s*([^\s]+)} $line d val] {
if [regexp {\d+} $val] {
set flags(stordelay) $val
}
}
if [regexp {HuaweiAltModeGlobal\s*=\s*([^\s]+)} $line d val] {
set flags(althuawei) [regexp -nocase {1|yes|true} $val]
}
}
return "Use global config file: $configFile"
}
# end of proc {ParseGlobalConfig}
proc ParseDeviceConfig {cfg} {
global config
set config(WaitBefore) ""
set config(TargetVendor) ""
set config(TargetProduct) ""
set config(TargetClass) ""
set config(Configuration) ""
set config(NoMBIMCheck) 0
set config(PantechMode) 0
set config(CheckSuccess) 20
foreach pname [lsort [array names config]] {
if [regexp -line "^\[^# \]*?$pname.*?= *(0x(\\w+)|\"(\[0-9a-fA-F,\]+)\"|(\[0-9\]+)) *\$" $cfg d config($pname)] {
# Log "config: $pname set to $config($pname)"
}
}
set config(WaitBefore) [string trimleft $config(WaitBefore) 0]
}
# end of proc {ParseDeviceConfig}
proc ConfigGet {command config} {
global setup usb flags
switch $command {
conflist {
# Unpackaged configs first; sorting is essential for priority
set configList [lsort -decreasing [glob -nocomplain $setup(dbdir_etc)/$config*]]
set configList [concat $configList [lsort -decreasing [glob -nocomplain $setup(dbdir)/$config*]]]
eval lappend configList [glob -nocomplain $setup(dbdir)/$usb(idVendor):#$flags(os)]
if [file exists $setup(dbdir)/configPack.tar.gz] {
Log "Found packed config collection $setup(dbdir)/configPack.tar.gz"
if [catch {set packedList [exec tar -tzf $setup(dbdir)/configPack.tar.gz 2>/dev/null]} err] {
Log "Error: problem opening config package; tar returned\n $err"
return {}
}
set packedList [split $packedList \n]
set packedConfigList [lsort -decreasing [lsearch -glob -all -inline $packedList $config*]]
lappend packedConfigList [lsearch -inline $packedList $usb(idVendor):#$flags(os)]
# Now add packaged configs with a mark, again sorted for priority
foreach packedConfig $packedConfigList {
lappend configList "pack/$packedConfig"
}
}
return $configList
}
conffile {
if [regexp {^pack/} $config] {
set config [regsub {pack/} $config {}]
Log "Extract config $config from collection $setup(dbdir)/configPack.tar.gz"
set configContent [exec tar -xzOf $setup(dbdir)/configPack.tar.gz $config 2>/dev/null]
} else {
if [regexp [list $setup(dbdir_etc)] $config] {
Log "Use config file from override folder $setup(dbdir_etc)"
SysLog "usb_modeswitch: use overriding config file $config; make sure this is intended"
SysLog "usb_modeswitch: please report any new or corrected settings; otherwise, check for outdated files"
}
set rc [open $config r]
set configContent [read $rc]
close $rc
}
return $configContent
}
}
}
# end of proc {ConfigGet}
proc {Log} {msg} {
global flags device loginit
if {$flags(logwrite) == 0} {append loginit $msg\n}
if {$flags(logging) == 0} {return}
if $flags(logwrite) {
if [string length $loginit] {
exec echo "\nUSB_ModeSwitch log from [clock format [clock seconds]]" >/var/log/usb_modeswitch_$device
exec echo "$loginit" >>/var/log/usb_modeswitch_$device
set loginit ""
}
exec echo $msg >>/var/log/usb_modeswitch_$device
} else {
append loginit "\n$msg"
}
}
# end of proc {Log}
# Writing the log file and exit
proc {SafeExit} {} {
global flags
set flags(logwrite) 1
Log ""
exit
}
# end of proc {SafeExit}
proc {SymLinkName} {path} {
global device flags
proc {hasInterrupt} {ifDir} {
if {[llength [glob -nocomplain $ifDir/ttyUSB*]] == 0} {
Log " no ttyUSB interface - skip endpoint check"
return 0
}
foreach epDir [glob -nocomplain $ifDir/ep_*] {
set e [file tail $epDir]
Log " check $e ..."
if [file exists $epDir/type] {
set rc [open $epDir/type r]
set type [read $rc]
close $rc
if [regexp {Interrupt} $type] {
Log " $e has interrupt transfer type"
return 1
}
}
}
return 0
}
# In case the device path is returned as /class/tty/ttyUSB,
# get the USB device path from linked tree "device"
set linkpath /sys$path/device
if [file exists $linkpath] {
if {[file type $linkpath] == "link"} {
set rawpath [file readlink $linkpath]
set trimpath [regsub -all {\.\./} $rawpath {}]
if [file isdirectory /sys/$trimpath] {
append loginit "\n Use path $path\n"
set path /$trimpath
}
}
}
if {![regexp {([0-9]+-[0-9]+[\.0-9]*:[^/]*).*(ttyUSB[0-9]+)} $path d myDev myPort]} {
if $flags(logging) {
set device [clock clicks]
Log "This is not a ttyUSB port. Abort"
}
return ""
}
set device ttyUSB_$myDev
set flags(logwrite) 1
Log "My name is $myPort\n"
if {![regexp {(.*?[0-9]+)\.([0-9]+)/ttyUSB} /sys$path d ifRoot ifNum]} {
Log "Could not find interface in path\n $path. Abort"
return ""
}
set ifDir $ifRoot.$ifNum
Log "Check my endpoints ...\n in $ifDir"
if [hasInterrupt $ifDir] {
Log "\n--> I am an interrupt port"
set rightPort 1
} else {
Log "\n--> I am not an interrupt port\n"
set rightPort 0
}
# There are devices with more than one interrupt interface.
# Assume that the lowest of these is usable. Check all
# possible lower interfaces
if { $rightPort && ($ifNum > 0) } {
Log "\nLook for lower ports with interrupt endpoints"
for {set i 0} {$i < $ifNum} {incr i} {
set ifDir $ifRoot.$i
Log " in ifDir $ifDir ..."
if [hasInterrupt $ifDir] {
Log "\n--> found an interrupt interface below me\n"
set rightPort 0
break
}
}
}
if {$rightPort == 0} {
Log "Return empty name and exit"
return ""
}
Log "\n--> No interrupt interface below me\n"
cd /dev
set idx 2
set symlinkName "gsmmodem"
while {$idx < 256} {
if {![file exists $symlinkName]} {
set placeholder [open /dev/$symlinkName w]
close $placeholder
break
}
set symlinkName gsmmodem$idx
incr idx
}
if {$idx == 256} {return ""}
Log "Return symlink name \"$symlinkName\" and exit"
return $symlinkName
}
# end of proc {SymLinkName}
# Add USB ID to list of devices needing later treatment
proc {AddToList} {name id} {
set listfile /var/lib/usb_modeswitch/$name
if [file exists $listfile] {
set rc [open $listfile r]
set buffer [read $rc]
close $rc
if [string match *$id* $buffer] {
return
}
set idList [split [string trim $buffer] \n]
}
lappend idList $id
set buffer [join $idList "\n"]
if [catch {set lc [open $listfile w]}] {return}
puts $lc $buffer
close $lc
}
# end of proc {AddToList}
proc {CheckSuccess} {devdir} {
global config usb flags
# For Cisco AM10, target device not on same port
if {$usb(idVendor) == "1307" && $usb(idProduct) == "1169"} {
set devdir [string range $devdir 0 end-1]2
}
set ifdir [file tail [IfDir 0 $devdir]]
if {[string length $config(TargetClass)] || [string length $config(Configuration)]} {
set config(TargetVendor) $usb(idVendor)
set config(TargetProduct) $usb(idProduct)
}
Log "Check success of mode switch for max. $config(CheckSuccess) seconds ..."
set expected 1
for {set i 1} {$i <= $config(CheckSuccess)} {incr i} {
after 1000
if {![file isdirectory $devdir]} {
Log " Wait for device file system ($i sec.) ..."
continue
} else {
Log " Read attributes ..."
}
set ifdir [IfDir 0 $devdir]
if {$ifdir == ""} {continue}
set ifdir [file tail $ifdir]
if {![ReadUSBAttrs $devdir $ifdir]} {
Log " Essential attributes are missing, continue wait ..."
continue
}
if [string length $config(Configuration)] {
if {$usb(bConfigurationValue) != $config(Configuration)} {continue}
}
if [string length $config(TargetClass)] {
if {![regexp -nocase $usb($ifdir/bInterfaceClass) $config(TargetClass)]} {
if {$config(class) != $usb($ifdir/bInterfaceClass} {
set expected 0
} else {continue}
}
}
if {![regexp -nocase $usb(idVendor) $config(TargetVendor)]} {
if {![regexp -nocase $usb(idVendor) $config(vendor)]} {
set expected 0
} else {continue}
}
if {![regexp -nocase $usb(idProduct) $config(TargetProduct)]} {
if {![regexp -nocase $usb(idProduct) $config(product)]} {
set expected 0
} else {continue}
}
# Arriving here means that device attributes have changed
if $expected {
Log " All attributes matched"
} else {
if [regexp -nocase {/[0-9a-f]+:#} $flags(config)] {
Log " idProduct has changed after generic mode-switch, assume success"
} else {
if [regexp {HuaweiAltMode} $flags(config)] {
Log " Alternative target attributes found, assume success"
} else {
Log " Attributes are different but target values are unexpected:"
LogAttributes
}
}
}
break
}
if {$i > 20} {return 0} else {return 1}
}
# end of proc {CheckSuccess}
proc {IfDir} {iface devdir} {
set files [glob -nocomplain $devdir/*]
set iffiles [lsort [lsearch -all -inline -regexp $files {^.*/[^/]*[0-9]+\.[0-9]$}]]
set sorted [concat $iffiles [lsort [lsearch -all -inline -regexp $files {^.*/[^/]*[0-9]+\.[0-9][0-9]$}]]]
if {[llength $sorted] == 0} {
return ""
}
set ifdir [lindex $sorted $iface]
if {![string length $ifdir] || ![file isdirectory $ifdir]} {
return ""
}
return $ifdir
}
# end of proc {IfDir}
proc {IfClass} {iface devdir} {
set ifdir [IfDir $iface $devdir]
if {![file exists $ifdir/bInterfaceClass]} {
return -1
}
set rc [open $ifdir/bInterfaceClass r]
set c [read $rc]
close $rc
return [string trim $c]
}
# end of proc {IfClass}
proc {ShowUsage} {} {
puts "Dispatcher for 'usb_modeswitch'; usually run by udev, not intended for interactive operation"
puts "Usage: usb_modeswitch_dispatcher [--config-file=<path>] --switch-mode=<device kernel name>"
puts " usb_modeswitch_dispatcher --symlink-name=<sys path to device>"
}
# end of proc {ShowUsage}
proc {SysLog} {msg} {
global flags
if {![info exists flags(logger)]} {
set flags(logger) ""
foreach fn {/bin/logger /usr/bin/logger} {
if [file exists $fn] {
set flags(logger) $fn
}
}
Log "Logger is $flags(logger)"
}
if {$flags(logger) == ""} {
Log "Can't add system message, no syslog helper found"
return
}
catch {exec $flags(logger) -p syslog.notice "$msg" 2>/dev/null}
}
# end of proc {SysLog}
proc {SetStorageDelay} {secs} {
Log "Adjust delay for USB storage devices ..."
set attrib /sys/module/usb_storage/parameters/delay_use
if {![file exists $attrib]} {
Log "Error: could not find delay_use attribute"
return
}
if [catch {set ch [open $attrib r+]} err] {
Log "Error: could not access delay_use attribute: $err"
return
}
if {[read $ch] < $secs} {
seek $ch 0 start
puts -nonewline $ch $secs
Log " Delay set to $secs seconds\n"
} else {
Log " Current value is higher than $secs. Leave it alone\n"
}
close $ch
}
# end of proc {SetStorageDelay}
proc {CheckMBIM} {} {
set kversion [exec uname -r]
if [llength [glob -nocomplain /lib/modules/$kversion/kernel/drivers/net/usb/cdc_mbim*]] {return 1}
if [file exists /sys/bus/usb/drivers/cdc_mbim] {return 1}
return 0
}
# end of proc {CheckMBIM}
proc {CheckQMI} {} {
set kversion [exec uname -r]
if [llength [glob -nocomplain /lib/modules/$kversion/kernel/drivers/net/usb/qmi_wwan*]] {return 1}
if [file exists /sys/bus/usb/drivers/cdc_mbim] {return 1}
return 0
}
# end of proc {CheckQMI}
proc {PantechAutoSwitch} {} {
global config flags
if {$config(PantechMode) == 3} {return 1}
if {$config(PantechMode) == 1} {
if {"$config(vendor):$config(product)" == "10a9:6080"} {
set flags(config) [regsub {PantechMode *= *1} $flags(config) "PantechMode=2"]
Log " PantechMode changed to 2"
return 0
} elseif [CheckQMI] {
set flags(config) [regsub {PantechMode *= *1} $flags(config) "PantechMode=4"]
Log " PantechMode changed to 4"
return 0
} else {
return 1
}
} else {return 0}
}
# end of proc {PantechAutoSwitch}
proc {LogAttributes} {} {
global flags usb
if $flags(logging) {
set attrList {idVendor idProduct bConfigurationValue manufacturer product serial}
foreach attr [lsort [array names usb]] {
Log " [format %-26s $attr:] $usb($attr)"
}
}
}
# end of proc {LogAttributes}
proc {HasFF} {devdir} {
set i 0
while {[set dir [IfDir $i $devdir]] != ""} {
set c [exec cat $dir/bInterfaceClass]
if {$c == "ff"} {return 1}
incr i
}
return 0
}
# end of proc {HasFF}
# The actual entry point
Main $argv $argc
Mini Shell