Current File : //proc/thread-self/root/lib/cryptsetup/cryptdisks-functions
#
# This file is for inclusion with
# . /lib/cryptsetup/cryptdisks-functions
# and should not be executed directly.
PATH="/usr/sbin:/usr/bin:/sbin:/bin"
CRYPTDISKS_ENABLE="Yes"
#set -x
# Sanity check #1
[ -x /sbin/cryptsetup ] || exit 0
. /lib/lsb/init-functions
. /lib/cryptsetup/functions
if [ -r /etc/default/cryptdisks ]; then
. /etc/default/cryptdisks
fi
MOUNT="$CRYPTDISKS_MOUNT"
# do_start()
# Unlock all devices in the crypttab(5)
do_start() {
[ -s "$TABFILE" ] || return 0
# Create locking directory before invoking cryptsetup(8) to avoid warnings
mkdir -pm0700 /run/cryptsetup
modprobe -qb dm-mod || true
modprobe -qb dm-crypt || true
dmsetup mknodes >/dev/null 2>&1 || true
if [ "$INITSTATE" != "init" ]; then
log_action_begin_msg "Starting $INITSTATE crypto disks"
fi
mount_fs
crypttab_foreach_entry _do_start_callback
umount_fs
log_action_end_msg 0
}
_do_start_callback() {
setup_mapping || log_action_end_msg $?
}
# mount_fs()
# Premounts file systems
mount_fs() {
local point
MOUNTED=""
for point in $MOUNT; do
if mount "$point" >/dev/null; then
MOUNTED="$MOUNTED $point"
fi
done
}
# Postunmounts file systems
umount_fs() {
local point
for point in $MOUNTED; do
umount "$point" >/dev/null
done
}
# setup_mapping()
# Set up a crypttab(5) mapping defined by $CRYPTTAB_NAME,
# $CRYPTTAB_SOURCE, $CRYPTTAB_KEY, $CRYPTTAB_OPTIONS.
setup_mapping() {
if dm_blkdevname "$CRYPTTAB_NAME" >/dev/null; then
device_msg "running"
return 0
fi
local loud="${DEFAULT_LOUD:-}"
crypttab_parse_options --export --missing-path=fail || return 1
if [ -n "${CRYPTTAB_OPTION_quiet+x}" ]; then
loud="no"
elif [ -n "${CRYPTTAB_OPTION_loud+x}" ]; then
loud="yes"
fi
if [ -z "${FORCE_START-}" ]; then
if [ "$INITSTATE" = "early" -a -n "${CRYPTTAB_OPTION_noearly+x}" ] ||
[ "$INITSTATE" != "manual" -a -n "${CRYPTTAB_OPTION_noauto+x}" ]; then
device_msg "ignored"
return 0
fi
fi
if [ -z "${CRYPTTAB_OPTION_keyscript+x}" ] && [ "$CRYPTTAB_KEY" != "none" ]; then
if ! crypttab_key_check; then
device_msg "invalid key"
return 1
fi
CRYPTTAB_OPTION_tries=1
fi
if ! crypttab_resolve_source; then
if [ "$loud" = "yes" ]; then
device_msg "skipped, device $CRYPTTAB_SOURCE does not exist"
fi
return 1
fi
device_msg "starting"
local offset_bytes=""
if [ -n "${CRYPTTAB_OPTION_offset+x}" ] && [ ${#CRYPTTAB_OPTION_offset} -le 7 ] && [ $CRYPTTAB_OPTION_offset -lt 4194304 ]; then
# silently ignore large offset values which might cause the multiplication to overflow...
offset_bytes=$((CRYPTTAB_OPTION_offset * 512))
fi
local out tmpdev
if [ "$CRYPTTAB_TYPE" != "luks" ] && [ "$CRYPTTAB_TYPE" != "bitlk" ]; then
# fail if the device has a filesystem and the disk encryption format doesn't
# verify the key digest (unlike LUKS); unless it's swap, otherwise people can't
# easily convert an existing plainttext swap partition to an encrypted one
if ! out="$(/lib/cryptsetup/checks/un_blkid "$CRYPTTAB_SOURCE" "" ${CRYPTTAB_OPTION_offset+"$offset_bytes"} 2>/dev/null)" &&
! /lib/cryptsetup/checks/blkid "$CRYPTTAB_SOURCE" swap ${CRYPTTAB_OPTION_offset+"$offset_bytes"} >/dev/null; then
log_warning_msg "$CRYPTTAB_NAME: the precheck for '$CRYPTTAB_SOURCE' failed: $out"
return 1
fi
fi
local count=0 maxtries="${CRYPTTAB_OPTION_tries:-3}" fstype rv
local target="$CRYPTTAB_NAME"
CRYPTTAB_NAME="${CRYPTTAB_NAME}_unformatted" # XXX potential conflict
while [ $maxtries -le 0 ] || [ $count -lt $maxtries ]; do
if [ -z "${CRYPTTAB_OPTION_keyscript+x}" ] && [ "$CRYPTTAB_KEY" != "none" ]; then
# unlock via keyfile
unlock_mapping "$CRYPTTAB_KEY"
else
# unlock interactively or via keyscript
CRYPTTAB_NAME="$target" run_keyscript "$count" | unlock_mapping
fi
rv=$?
count=$(( $count + 1 ))
if [ $rv -ne 0 ] || ! tmpdev="$(dm_blkdevname "$CRYPTTAB_NAME")"; then
continue
fi
if [ -n "${CRYPTTAB_OPTION_check+x}" ] && \
! "$CRYPTTAB_OPTION_check" "$tmpdev" ${CRYPTTAB_OPTION_checkargs+"$CRYPTTAB_OPTION_checkargs"}; then
log_warning_msg "$target: the check for '$CRYPTTAB_NAME' failed"
cryptsetup remove -- "$CRYPTTAB_NAME"
continue
fi
if [ "${CRYPTTAB_OPTION_swap+x}" ]; then
if out="$(/lib/cryptsetup/checks/un_blkid "$tmpdev" "" ${CRYPTTAB_OPTION_offset+"$offset_bytes"} 2>/dev/null)" ||
/lib/cryptsetup/checks/blkid "$tmpdev" swap ${CRYPTTAB_OPTION_offset+"$offset_bytes"} >/dev/null 2>&1; then
mkswap "$tmpdev" >/dev/null 2>&1
else
log_warning_msg "$target: the check for '$CRYPTTAB_NAME' failed. $CRYPTTAB_NAME contains data: $out"
cryptsetup remove -- "$CRYPTTAB_NAME"
return 1
fi
elif [ "${CRYPTTAB_OPTION_tmp+x}" ]; then
local tmpdir="$(mktemp --tmpdir="/run/cryptsetup" --directory)" rv=0
if ! mkfs -t "$CRYPTTAB_OPTION_tmp" -q "$tmpdev" >/dev/null 2>&1 ||
! mount -t "$CRYPTTAB_OPTION_tmp" "$tmpdev" "$tmpdir" ||
! chmod 1777 "$tmpdir"; then
rv=1
fi
umount "$tmpdir" || true
rmdir "$tmpdir" || true
[ $rv -eq 0 ] || return $rv
fi
if command -v udevadm >/dev/null 2>&1; then
udevadm settle
fi
dmsetup rename -- "$CRYPTTAB_NAME" "$target"
device_msg "$target" "started"
return 0
done
device_msg "$target" "failed"
return 1
}
# Removes all mappings in crypttab, except the ones holding the root
# file system or /usr
do_stop() {
local devno_rootfs devno_usr
dmsetup mknodes
log_action_begin_msg "Stopping $INITSTATE crypto disks"
devno_rootfs="$(get_mnt_devno /)" || devno_rootfs=""
devno_usr="$(get_mnt_devno /usr)" || devno_usr=""
crypttab_foreach_entry _do_stop_callback
log_action_end_msg 0
}
_do_stop_callback() {
local i rv=0 skip="n"
# traverse the device tree for each crypttab(5) entry, that's
# suboptimal but we can't use mapped device names as they might
# contain any character other than NUL. shouldn't be much overhead
# anyway as the device tree is likely not that long
foreach_cryptdev _do_stop_skipped $devno_rootfs $devno_usr
if [ "$skip" = "n" ]; then
for i in 1 2 4 8 16 32; do
remove_mapping "$CRYPTTAB_NAME" 3<&- && break || rv=$?
if [ $rv -eq 1 ] || [ $rv -eq 2 -a $i -gt 16 ]; then
log_action_end_msg $rv
break
fi
log_action_cont_msg "$CRYPTTAB_NAME busy..."
sleep $i
done
fi
}
_do_stop_skipped() {
if [ "$1" = "$CRYPTTAB_NAME" ]; then
skip="y"
fi
}
# device_msg([$name], $message)
# Convenience function to handle $VERBOSE
device_msg() {
local name message
if [ $# -eq 1 ]; then
name="$CRYPTTAB_NAME"
message="$1"
else
name="$1"
message="$2"
fi
if [ "$VERBOSE" != "no" ]; then
log_action_cont_msg "$name ($message)"
fi
}
# remove_mapping($target)
# Remove mapping $target
remove_mapping() {
local CRYPTTAB_NAME="$1"
if ! dm_blkdevname "$CRYPTTAB_NAME" >/dev/null; then
device_msg "stopped"
return 0
fi
if [ "$(dmsetup info --noheadings -c -o subsystem -- "$CRYPTTAB_NAME")" != "CRYPT" ]; then
device_msg "error"
return 1
fi
local opencount="$(dmsetup info -c --noheadings -o open -- "$CRYPTTAB_NAME" 2>/dev/null || true)"
if [ -z "$opencount" ]; then
device_msg "error"
return 1
elif [ "$opencount" != "0" ]; then
device_msg "busy"
if [ "$INITSTATE" = "early" ] || [ "$INITSTATE" = "manual" ]; then
return 1
elif [ "$INITSTATE" = "remaining" ]; then
return 2
fi
return 0
fi
if cryptsetup remove -- "$CRYPTTAB_NAME"; then
device_msg "stopping"
return 0
else
device_msg "error"
return 1
fi
}
# vim: set filetype=sh :
Mini Shell