%PDF- %PDF-
Direktori : /proc/self/root/usr/src/linux-headers-5.15.0-125/arch/m68k/include/asm/ |
Current File : //proc/self/root/usr/src/linux-headers-5.15.0-125/arch/m68k/include/asm/m54xxpci.h |
/****************************************************************************/ /* * m54xxpci.h -- ColdFire 547x and 548x PCI bus support * * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. */ /****************************************************************************/ #ifndef M54XXPCI_H #define M54XXPCI_H /****************************************************************************/ /* * The core set of PCI support registers are mapped into the MBAR region. */ #define PCIIDR (CONFIG_MBAR + 0xb00) /* PCI device/vendor ID */ #define PCISCR (CONFIG_MBAR + 0xb04) /* PCI status/command */ #define PCICCRIR (CONFIG_MBAR + 0xb08) /* PCI class/revision */ #define PCICR1 (CONFIG_MBAR + 0xb0c) /* PCI configuration 1 */ #define PCIBAR0 (CONFIG_MBAR + 0xb10) /* PCI base address 0 */ #define PCIBAR1 (CONFIG_MBAR + 0xb14) /* PCI base address 1 */ #define PCICCPR (CONFIG_MBAR + 0xb28) /* PCI cardbus CIS pointer */ #define PCISID (CONFIG_MBAR + 0xb2c) /* PCI subsystem IDs */ #define PCIERBAR (CONFIG_MBAR + 0xb30) /* PCI expansion ROM */ #define PCICPR (CONFIG_MBAR + 0xb34) /* PCI capabilities pointer */ #define PCICR2 (CONFIG_MBAR + 0xb3c) /* PCI configuration 2 */ #define PCIGSCR (CONFIG_MBAR + 0xb60) /* Global status/control */ #define PCITBATR0 (CONFIG_MBAR + 0xb64) /* Target base translation 0 */ #define PCITBATR1 (CONFIG_MBAR + 0xb68) /* Target base translation 1 */ #define PCITCR (CONFIG_MBAR + 0xb6c) /* Target control */ #define PCIIW0BTAR (CONFIG_MBAR + 0xb70) /* Initiator window 0 */ #define PCIIW1BTAR (CONFIG_MBAR + 0xb74) /* Initiator window 1 */ #define PCIIW2BTAR (CONFIG_MBAR + 0xb78) /* Initiator window 2 */ #define PCIIWCR (CONFIG_MBAR + 0xb80) /* Initiator window config */ #define PCIICR (CONFIG_MBAR + 0xb84) /* Initiator control */ #define PCIISR (CONFIG_MBAR + 0xb88) /* Initiator status */ #define PCICAR (CONFIG_MBAR + 0xbf8) /* Configuration address */ #define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */ #define PCITSAR (CONFIG_MBAR + 0x8404) /* TX start address */ #define PCITTCR (CONFIG_MBAR + 0x8408) /* TX transaction control */ #define PCITER (CONFIG_MBAR + 0x840c) /* TX enables */ #define PCITNAR (CONFIG_MBAR + 0x8410) /* TX next address */ #define PCITLWR (CONFIG_MBAR + 0x8414) /* TX last word */ #define PCITDCR (CONFIG_MBAR + 0x8418) /* TX done counts */ #define PCITSR (CONFIG_MBAR + 0x841c) /* TX status */ #define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */ #define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */ #define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */ #define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */ #define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */ #define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */ #define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */ #define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */ #define PCIRTCR (CONFIG_MBAR + 0x8488) /* RX transaction control */ #define PCIRER (CONFIG_MBAR + 0x848c) /* RX enables */ #define PCIRNAR (CONFIG_MBAR + 0x8490) /* RX next address */ #define PCIRDCR (CONFIG_MBAR + 0x8498) /* RX done counts */ #define PCIRSR (CONFIG_MBAR + 0x849c) /* RX status */ #define PCIRFDR (CONFIG_MBAR + 0x84c0) /* RX FIFO data */ #define PCIRFSR (CONFIG_MBAR + 0x84c4) /* RX FIFO status */ #define PCIRFCR (CONFIG_MBAR + 0x84c8) /* RX FIFO control */ #define PCIRFAR (CONFIG_MBAR + 0x84cc) /* RX FIFO alarm */ #define PCIRFRPR (CONFIG_MBAR + 0x84d0) /* RX FIFO read pointer */ #define PCIRFWPR (CONFIG_MBAR + 0x84d4) /* RX FIFO write pointer */ #define PACR (CONFIG_MBAR + 0xc00) /* PCI arbiter control */ #define PASR (CONFIG_MBAR + 0xc04) /* PCI arbiter status */ /* * Definitions for the Global status and control register. */ #define PCIGSCR_PE 0x20000000 /* Parity error detected */ #define PCIGSCR_SE 0x10000000 /* System error detected */ #define PCIGSCR_XCLKBIN 0x07000000 /* XLB2CLKIN mask */ #define PCIGSCR_PEE 0x00002000 /* Parity error intr enable */ #define PCIGSCR_SEE 0x00001000 /* System error intr enable */ #define PCIGSCR_RESET 0x00000001 /* Reset bit */ /* * Bit definitions for the PCICAR configuration address register. */ #define PCICAR_E 0x80000000 /* Enable config space */ #define PCICAR_BUSN 16 /* Move bus bits */ #define PCICAR_DEVFNN 8 /* Move devfn bits */ #define PCICAR_DWORDN 0 /* Move dword bits */ /* * The initiator windows hold the memory and IO mapping information. * This macro creates the register values from the desired addresses. */ #define WXBTAR(hostaddr, pciaddr, size) \ (((hostaddr) & 0xff000000) | \ ((((size) - 1) & 0xff000000) >> 8) | \ (((pciaddr) & 0xff000000) >> 16)) #define PCIIWCR_W0_MEM 0x00000000 /* Window 0 is memory */ #define PCIIWCR_W0_IO 0x08000000 /* Window 0 is IO */ #define PCIIWCR_W0_MRD 0x00000000 /* Window 0 memory read */ #define PCIIWCR_W0_MRDL 0x02000000 /* Window 0 memory read line */ #define PCIIWCR_W0_MRDM 0x04000000 /* Window 0 memory read mult */ #define PCIIWCR_W0_E 0x01000000 /* Window 0 enable */ #define PCIIWCR_W1_MEM 0x00000000 /* Window 0 is memory */ #define PCIIWCR_W1_IO 0x00080000 /* Window 0 is IO */ #define PCIIWCR_W1_MRD 0x00000000 /* Window 0 memory read */ #define PCIIWCR_W1_MRDL 0x00020000 /* Window 0 memory read line */ #define PCIIWCR_W1_MRDM 0x00040000 /* Window 0 memory read mult */ #define PCIIWCR_W1_E 0x00010000 /* Window 0 enable */ /* * Bit definitions for the PCIBATR registers. */ #define PCITBATR0_E 0x00000001 /* Enable window 0 */ #define PCITBATR1_E 0x00000001 /* Enable window 1 */ /* * PCI arbiter support definitions and macros. */ #define PACR_INTMPRI 0x00000001 #define PACR_EXTMPRI(x) (((x) & 0x1f) << 1) #define PACR_INTMINTE 0x00010000 #define PACR_EXTMINTE(x) (((x) & 0x1f) << 17) #define PACR_PKMD 0x40000000 #define PACR_DS 0x80000000 #define PCICR1_CL(x) ((x) & 0xf) /* Cacheline size field */ #define PCICR1_LT(x) (((x) & 0xff) << 8) /* Latency timer field */ /****************************************************************************/ #endif /* M54XXPCI_H */