Current File : //proc/self/root/usr/src/linux-headers-5.15.0-125/arch/m68k/Kconfig.machine
# SPDX-License-Identifier: GPL-2.0
comment "Machine Types"
if M68KCLASSIC
config AMIGA
bool "Amiga support"
depends on MMU
select MMU_MOTOROLA if MMU
select LEGACY_TIMER_TICK
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
material available in <file:Documentation/m68k>; otherwise say N.
config ATARI
bool "Atari support"
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
select LEGACY_TIMER_TICK
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
this kernel on an Atari, say Y here and browse the material
available in <file:Documentation/m68k>; otherwise say N.
config ATARI_KBD_CORE
bool
config MAC
bool "Macintosh support"
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
select HAVE_PATA_PLATFORM
select LEGACY_TIMER_TICK
help
This option enables support for the Apple Macintosh series of
computers. If you plan to use this kernel on a Mac, say Y here and
browse the documentation available at <http://www.mac.linux-m68k.org/>;
otherwise say N.
config APOLLO
bool "Apollo support"
depends on MMU
select MMU_MOTOROLA if MMU
select LEGACY_TIMER_TICK
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
config VME
bool "VME (Motorola and BVM) support"
depends on MMU
select MMU_MOTOROLA if MMU
help
Say Y here if you want to build a kernel for a 680x0 based VME
board. Boards currently supported include Motorola boards MVME147,
MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
BVME6000 boards from BVM Ltd are also supported.
config MVME147
bool "MVME147 support"
depends on MMU
depends on VME
select LEGACY_TIMER_TICK
help
Say Y to include support for early Motorola VME boards. This will
build a kernel which can run on MVME147 single-board computers. If
you select this option you will have to select the appropriate
drivers for SCSI, Ethernet and serial ports later on.
config MVME16x
bool "MVME162, 166 and 167 support"
depends on MMU
depends on VME
select LEGACY_TIMER_TICK
help
Say Y to include support for Motorola VME boards. This will build a
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
MVME177 boards. If you select this option you will have to select
the appropriate drivers for SCSI, Ethernet and serial ports later
on.
config BVME6000
bool "BVME4000 and BVME6000 support"
depends on MMU
depends on VME
select LEGACY_TIMER_TICK
help
Say Y to include support for VME boards from BVM Ltd. This will
build a kernel which can run on BVME4000 and BVME6000 boards. If
you select this option you will have to select the appropriate
drivers for SCSI, Ethernet and serial ports later on.
config HP300
bool "HP9000/300 and HP9000/400 support"
depends on MMU
select MMU_MOTOROLA if MMU
select LEGACY_TIMER_TICK
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
experimental. If you plan to try to use the kernel on such a machine
say Y here.
Everybody else says N.
config SUN3X
bool "Sun3x support"
depends on MMU
select LEGACY_TIMER_TICK
select MMU_MOTOROLA if MMU
select M68030
help
This option enables support for the Sun 3x series of workstations.
Be warned that this support is very experimental.
Note that Sun 3x kernels are not compatible with Sun 3 hardware.
General Linux information on the Sun 3x series (now discontinued)
is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you don't want to compile a kernel for a Sun 3x, say N.
config Q40
bool "Q40/Q60 support"
depends on MMU
select MMU_MOTOROLA if MMU
select LEGACY_TIMER_TICK
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
<http://www.q40.de/>. This option enables support for the Q40 and
Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
emulation.
config SUN3
bool "Sun3 support"
depends on MMU
depends on !MMU_MOTOROLA
select MMU_SUN3 if MMU
select LEGACY_TIMER_TICK
select NO_DMA
select M68020
help
This option enables support for the Sun 3 series of workstations
(3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
that all other hardware types must be disabled, as Sun 3 kernels
are incompatible with all other m68k targets (including Sun 3x!).
If you don't want to compile a kernel exclusively for a Sun 3, say N.
config PILOT
bool
config PILOT3
bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
depends on !MMU
select M68328
select PILOT
help
Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
config XCOPILOT_BUGS
bool "(X)Copilot support"
depends on PILOT3
help
Support the bugs of Xcopilot.
config UCSIMM
bool "uCsimm module support"
depends on !MMU
select M68EZ328
help
Support for the Arcturus Networks uCsimm module.
config UCDIMM
bool "uDsimm module support"
depends on !MMU
select M68VZ328
help
Support for the Arcturus Networks uDsimm module.
config DRAGEN2
bool "DragenEngine II board support"
depends on !MMU
select M68VZ328
help
Support for the DragenEngine II board.
config DIRECT_IO_ACCESS
bool "Allow user to access IO directly"
depends on (UCSIMM || UCDIMM || DRAGEN2)
help
Disable the CPU internal registers protection in user mode,
to allow a user application to read/write them.
config INIT_LCD
bool "Initialize LCD"
depends on (UCSIMM || UCDIMM || DRAGEN2)
help
Initialize the LCD controller of the 68x328 processor.
config MEMORY_RESERVE
int "Memory reservation (MiB)"
depends on (UCSIMM || UCDIMM)
default 0
help
Reserve certain memory regions on 68x328 based boards.
endif # M68KCLASSIC
config ARN5206
bool "Arnewsh 5206 board support"
depends on M5206
help
Support for the Arnewsh 5206 board.
config M5206eC3
bool "Motorola M5206eC3 board support"
depends on M5206e
help
Support for the Motorola M5206eC3 board.
config ELITE
bool "Motorola M5206eLITE board support"
depends on M5206e
help
Support for the Motorola M5206eLITE board.
config M5235EVB
bool "Freescale M5235EVB support"
depends on M523x
help
Support for the Freescale M5235EVB board.
config M5249C3
bool "Motorola M5249C3 board support"
depends on M5249
help
Support for the Motorola M5249C3 board.
config M5272C3
bool "Motorola M5272C3 board support"
depends on M5272
help
Support for the Motorola M5272C3 board.
config WILDFIRE
bool "Intec Automation Inc. WildFire board support"
depends on M528x
help
Support for the Intec Automation Inc. WildFire.
config WILDFIREMOD
bool "Intec Automation Inc. WildFire module support"
depends on M528x
help
Support for the Intec Automation Inc. WildFire module.
config ARN5307
bool "Arnewsh 5307 board support"
depends on M5307
help
Support for the Arnewsh 5307 board.
config M5307C3
bool "Motorola M5307C3 board support"
depends on M5307
help
Support for the Motorola M5307C3 board.
config SECUREEDGEMP3
bool "SnapGear SecureEdge/MP3 platform support"
depends on M5307
help
Support for the SnapGear SecureEdge/MP3 platform.
config M5407C3
bool "Motorola M5407C3 board support"
depends on M5407
help
Support for the Motorola M5407C3 board.
config AMCORE
bool "Sysam AMCORE board support"
depends on M5307
help
Support for the Sysam AMCORE open-hardware generic board.
config STMARK2
bool "Sysam stmark2 board support"
depends on M5441x
help
Support for the Sysam stmark2 open-hardware generic board.
config FIREBEE
bool "FireBee board support"
depends on M547x
help
Support for the FireBee ColdFire 5475 based board.
config CLEOPATRA
bool "Feith CLEOPATRA board support"
depends on (M5307 || M5407)
help
Support for the Feith Cleopatra boards.
config CANCam
bool "Feith CANCam board support"
depends on M5272
help
Support for the Feith CANCam board.
config SCALES
bool "Feith SCALES board support"
depends on M5272
help
Support for the Feith SCALES board.
config NETtel
bool "SecureEdge/NETtel board support"
depends on (M5206e || M5272 || M5307)
help
Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
config MOD5272
bool "Netburner MOD-5272 board support"
depends on M5272
help
Support for the Netburner MOD-5272 board.
if !MMU || COLDFIRE
comment "Machine Options"
config UBOOT
bool "Support for U-Boot command line parameters"
depends on COLDFIRE
help
If you say Y here kernel will try to collect command
line parameters from the initial u-boot stack.
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
default y
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
running more threads on a system and also reduces the pressure
on the VM subsystem for higher order allocations.
comment "RAM configuration"
config RAMBASE
hex "Address of the base of RAM"
default "0"
help
Define the address that RAM starts at. On many platforms this is
0, the base of the address space. And this is the default. Some
platforms choose to setup their RAM at other addresses within the
processor address space.
config RAMSIZE
hex "Size of RAM (in bytes), or 0 for automatic"
default "0x400000"
help
Define the size of the system RAM. If you select 0 then the
kernel will try to probe the RAM size at runtime. This is not
supported on all CPU types.
config VECTORBASE
hex "Address of the base of system vectors"
default "0"
help
Define the address of the system vectors. Commonly this is
put at the start of RAM, but it doesn't have to be. On ColdFire
platforms this address is programmed into the VBR register, thus
actually setting the address to use.
config MBAR
hex "Address of the MBAR (internal peripherals)"
default "0x10000000"
depends on HAVE_MBAR
help
Define the address of the internal system peripherals. This value
is set in the processors MBAR register. This is generally setup by
the boot loader, and will not be written by the kernel. By far most
ColdFire boards use the default 0x10000000 value, so if unsure then
use this.
config IPSBAR
hex "Address of the IPSBAR (internal peripherals)"
default "0x40000000"
depends on HAVE_IPSBAR
help
Define the address of the internal system peripherals. This value
is set in the processors IPSBAR register. This is generally setup by
the boot loader, and will not be written by the kernel. By far most
ColdFire boards use the default 0x40000000 value, so if unsure then
use this.
config KERNELBASE
hex "Address of the base of kernel code"
default "0x400"
help
Typically on m68k systems the kernel will not start at the base
of RAM, but usually some small offset from it. Define the start
address of the kernel here. The most common setup will have the
processor vectors at the base of RAM and then the start of the
kernel. On some platforms some RAM is reserved for boot loaders
and the kernel starts after that. The 0x400 default was based on
a system with the RAM based at address 0, and leaving enough room
for the theoretical maximum number of 256 vectors.
comment "ROM configuration"
config ROM
bool "Specify ROM linker regions"
help
Define a ROM region for the linker script. This creates a kernel
that can be stored in flash, with possibly the text, and data
regions being copied out to RAM at startup.
config ROMBASE
hex "Address of the base of ROM device"
default "0"
depends on ROM
help
Define the address that the ROM region starts at. Some platforms
use this to set their chip select region accordingly for the boot
device.
config ROMVEC
hex "Address of the base of the ROM vectors"
default "0"
depends on ROM
help
This is almost always the same as the base of the ROM. Since on all
68000 type variants the vectors are at the base of the boot device
on system startup.
config ROMSTART
hex "Address of the base of system image in ROM"
default "0x400"
depends on ROM
help
Define the start address of the system image in ROM. Commonly this
is strait after the ROM vectors.
config ROMSIZE
hex "Size of the ROM device"
default "0x100000"
depends on ROM
help
Size of the ROM device. On some platforms this is used to setup
the chip select that controls the boot ROM device.
choice
prompt "Kernel executes from"
help
Choose the memory type that the kernel will be running in.
config RAMKERNEL
bool "RAM"
help
The kernel will be resident in RAM when running.
config ROMKERNEL
bool "ROM"
depends on ROM
help
The kernel will be resident in FLASH/ROM when running. This is
often referred to as Execute-in-Place (XIP), since the kernel
code executes from the position it is stored in the FLASH/ROM.
endchoice
endif
Mini Shell