Current File : //lib/python3/dist-packages/twisted/protocols/ftp.py
# -*- test-case-name: twisted.test.test_ftp -*-
# Copyright (c) Twisted Matrix Laboratories.
# See LICENSE for details.
"""
An FTP protocol implementation
"""
import errno
import fnmatch
# System Imports
import os
import re
import stat
import time
try:
import grp
import pwd
except ImportError:
pwd = grp = None # type: ignore[assignment]
from zope.interface import Interface, implementer
# Twisted Imports
from twisted import copyright
from twisted.cred import checkers, credentials, error as cred_error, portal
from twisted.internet import defer, error, interfaces, protocol, reactor
from twisted.protocols import basic, policies
from twisted.python import failure, filepath, log
# constants
# response codes
RESTART_MARKER_REPLY = "100"
SERVICE_READY_IN_N_MINUTES = "120"
DATA_CNX_ALREADY_OPEN_START_XFR = "125"
FILE_STATUS_OK_OPEN_DATA_CNX = "150"
CMD_OK = "200.1"
TYPE_SET_OK = "200.2"
ENTERING_PORT_MODE = "200.3"
CMD_NOT_IMPLMNTD_SUPERFLUOUS = "202"
SYS_STATUS_OR_HELP_REPLY = "211.1"
FEAT_OK = "211.2"
DIR_STATUS = "212"
FILE_STATUS = "213"
HELP_MSG = "214"
NAME_SYS_TYPE = "215"
SVC_READY_FOR_NEW_USER = "220.1"
WELCOME_MSG = "220.2"
SVC_CLOSING_CTRL_CNX = "221.1"
GOODBYE_MSG = "221.2"
DATA_CNX_OPEN_NO_XFR_IN_PROGRESS = "225"
CLOSING_DATA_CNX = "226.1"
TXFR_COMPLETE_OK = "226.2"
ENTERING_PASV_MODE = "227"
ENTERING_EPSV_MODE = "229"
USR_LOGGED_IN_PROCEED = "230.1" # v1 of code 230
GUEST_LOGGED_IN_PROCEED = "230.2" # v2 of code 230
REQ_FILE_ACTN_COMPLETED_OK = "250"
PWD_REPLY = "257.1"
MKD_REPLY = "257.2"
USR_NAME_OK_NEED_PASS = "331.1" # v1 of Code 331
GUEST_NAME_OK_NEED_EMAIL = "331.2" # v2 of code 331
NEED_ACCT_FOR_LOGIN = "332"
REQ_FILE_ACTN_PENDING_FURTHER_INFO = "350"
SVC_NOT_AVAIL_CLOSING_CTRL_CNX = "421.1"
TOO_MANY_CONNECTIONS = "421.2"
CANT_OPEN_DATA_CNX = "425"
CNX_CLOSED_TXFR_ABORTED = "426"
REQ_ACTN_ABRTD_FILE_UNAVAIL = "450"
REQ_ACTN_ABRTD_LOCAL_ERR = "451"
REQ_ACTN_ABRTD_INSUFF_STORAGE = "452"
SYNTAX_ERR = "500"
SYNTAX_ERR_IN_ARGS = "501"
CMD_NOT_IMPLMNTD = "502.1"
OPTS_NOT_IMPLEMENTED = "502.2"
BAD_CMD_SEQ = "503"
CMD_NOT_IMPLMNTD_FOR_PARAM = "504"
NOT_LOGGED_IN = "530.1" # v1 of code 530 - please log in
AUTH_FAILURE = "530.2" # v2 of code 530 - authorization failure
NEED_ACCT_FOR_STOR = "532"
FILE_NOT_FOUND = "550.1" # no such file or directory
PERMISSION_DENIED = "550.2" # permission denied
ANON_USER_DENIED = "550.3" # anonymous users can't alter filesystem
IS_NOT_A_DIR = "550.4" # rmd called on a path that is not a directory
REQ_ACTN_NOT_TAKEN = "550.5"
FILE_EXISTS = "550.6"
IS_A_DIR = "550.7"
PAGE_TYPE_UNK = "551"
EXCEEDED_STORAGE_ALLOC = "552"
FILENAME_NOT_ALLOWED = "553"
RESPONSE = {
# -- 100's --
# TODO: this must be fixed
RESTART_MARKER_REPLY: "110 MARK yyyy-mmmm",
SERVICE_READY_IN_N_MINUTES: "120 service ready in %s minutes",
DATA_CNX_ALREADY_OPEN_START_XFR: "125 Data connection already open, "
"starting transfer",
FILE_STATUS_OK_OPEN_DATA_CNX: "150 File status okay; about to open "
"data connection.",
# -- 200's --
CMD_OK: "200 Command OK",
TYPE_SET_OK: "200 Type set to %s.",
ENTERING_PORT_MODE: "200 PORT OK",
CMD_NOT_IMPLMNTD_SUPERFLUOUS: "202 Command not implemented, "
"superfluous at this site",
SYS_STATUS_OR_HELP_REPLY: "211 System status reply",
FEAT_OK: ["211-Features:", "211 End"],
DIR_STATUS: "212 %s",
FILE_STATUS: "213 %s",
HELP_MSG: "214 help: %s",
NAME_SYS_TYPE: "215 UNIX Type: L8",
WELCOME_MSG: "220 %s",
SVC_READY_FOR_NEW_USER: "220 Service ready",
SVC_CLOSING_CTRL_CNX: "221 Service closing control " "connection",
GOODBYE_MSG: "221 Goodbye.",
DATA_CNX_OPEN_NO_XFR_IN_PROGRESS: "225 data connection open, no "
"transfer in progress",
CLOSING_DATA_CNX: "226 Abort successful",
TXFR_COMPLETE_OK: "226 Transfer Complete.",
ENTERING_PASV_MODE: "227 Entering Passive Mode (%s).",
# Where is EPSV defined in the RFCs?
ENTERING_EPSV_MODE: "229 Entering Extended Passive Mode " "(|||%s|).",
USR_LOGGED_IN_PROCEED: "230 User logged in, proceed",
GUEST_LOGGED_IN_PROCEED: "230 Anonymous login ok, access " "restrictions apply.",
# i.e. CWD completed OK
REQ_FILE_ACTN_COMPLETED_OK: "250 Requested File Action Completed " "OK",
PWD_REPLY: '257 "%s"',
MKD_REPLY: '257 "%s" created',
# -- 300's --
USR_NAME_OK_NEED_PASS: "331 Password required for %s.",
GUEST_NAME_OK_NEED_EMAIL: "331 Guest login ok, type your email "
"address as password.",
NEED_ACCT_FOR_LOGIN: "332 Need account for login.",
REQ_FILE_ACTN_PENDING_FURTHER_INFO: "350 Requested file action pending "
"further information.",
# -- 400's --
SVC_NOT_AVAIL_CLOSING_CTRL_CNX: "421 Service not available, closing "
"control connection.",
TOO_MANY_CONNECTIONS: "421 Too many users right now, try "
"again in a few minutes.",
CANT_OPEN_DATA_CNX: "425 Can't open data connection.",
CNX_CLOSED_TXFR_ABORTED: "426 Transfer aborted. Data " "connection closed.",
REQ_ACTN_ABRTD_FILE_UNAVAIL: "450 Requested action aborted. " "File unavailable.",
REQ_ACTN_ABRTD_LOCAL_ERR: "451 Requested action aborted. "
"Local error in processing.",
REQ_ACTN_ABRTD_INSUFF_STORAGE: "452 Requested action aborted. "
"Insufficient storage.",
# -- 500's --
SYNTAX_ERR: "500 Syntax error: %s",
SYNTAX_ERR_IN_ARGS: "501 syntax error in argument(s) %s.",
CMD_NOT_IMPLMNTD: "502 Command '%s' not implemented",
OPTS_NOT_IMPLEMENTED: "502 Option '%s' not implemented.",
BAD_CMD_SEQ: "503 Incorrect sequence of commands: " "%s",
CMD_NOT_IMPLMNTD_FOR_PARAM: "504 Not implemented for parameter " "'%s'.",
NOT_LOGGED_IN: "530 Please login with USER and PASS.",
AUTH_FAILURE: "530 Sorry, Authentication failed.",
NEED_ACCT_FOR_STOR: "532 Need an account for storing " "files",
FILE_NOT_FOUND: "550 %s: No such file or directory.",
PERMISSION_DENIED: "550 %s: Permission denied.",
ANON_USER_DENIED: "550 Anonymous users are forbidden to " "change the filesystem",
IS_NOT_A_DIR: "550 Cannot rmd, %s is not a " "directory",
FILE_EXISTS: "550 %s: File exists",
IS_A_DIR: "550 %s: is a directory",
REQ_ACTN_NOT_TAKEN: "550 Requested action not taken: %s",
PAGE_TYPE_UNK: "551 Page type unknown",
EXCEEDED_STORAGE_ALLOC: "552 Requested file action aborted, "
"exceeded file storage allocation",
FILENAME_NOT_ALLOWED: "553 Requested action not taken, file " "name not allowed",
}
class InvalidPath(Exception):
"""
Internal exception used to signify an error during parsing a path.
"""
def toSegments(cwd, path):
"""
Normalize a path, as represented by a list of strings each
representing one segment of the path.
"""
if path.startswith("/"):
segs = []
else:
segs = cwd[:]
for s in path.split("/"):
if s == "." or s == "":
continue
elif s == "..":
if segs:
segs.pop()
else:
raise InvalidPath(cwd, path)
elif "\0" in s or "/" in s:
raise InvalidPath(cwd, path)
else:
segs.append(s)
return segs
def errnoToFailure(e, path):
"""
Map C{OSError} and C{IOError} to standard FTP errors.
"""
if e == errno.ENOENT:
return defer.fail(FileNotFoundError(path))
elif e == errno.EACCES or e == errno.EPERM:
return defer.fail(PermissionDeniedError(path))
elif e == errno.ENOTDIR:
return defer.fail(IsNotADirectoryError(path))
elif e == errno.EEXIST:
return defer.fail(FileExistsError(path))
elif e == errno.EISDIR:
return defer.fail(IsADirectoryError(path))
else:
return defer.fail()
_testTranslation = fnmatch.translate("TEST")
def _isGlobbingExpression(segments=None):
"""
Helper for checking if a FTPShell `segments` contains a wildcard Unix
expression.
Only filename globbing is supported.
This means that wildcards can only be presents in the last element of
`segments`.
@type segments: C{list}
@param segments: List of path elements as used by the FTP server protocol.
@rtype: Boolean
@return: True if `segments` contains a globbing expression.
"""
if not segments:
return False
# To check that something is a glob expression, we convert it to
# Regular Expression.
# We compare it to the translation of a known non-glob expression.
# If the result is the same as the original expression then it contains no
# globbing expression.
globCandidate = segments[-1]
globTranslations = fnmatch.translate(globCandidate)
nonGlobTranslations = _testTranslation.replace("TEST", globCandidate, 1)
if nonGlobTranslations == globTranslations:
return False
else:
return True
class FTPCmdError(Exception):
"""
Generic exception for FTP commands.
"""
def __init__(self, *msg):
Exception.__init__(self, *msg)
self.errorMessage = msg
def response(self):
"""
Generate a FTP response message for this error.
"""
return RESPONSE[self.errorCode] % self.errorMessage
class FileNotFoundError(FTPCmdError):
"""
Raised when trying to access a non existent file or directory.
"""
errorCode = FILE_NOT_FOUND
class AnonUserDeniedError(FTPCmdError):
"""
Raised when an anonymous user issues a command that will alter the
filesystem
"""
errorCode = ANON_USER_DENIED
class PermissionDeniedError(FTPCmdError):
"""
Raised when access is attempted to a resource to which access is
not allowed.
"""
errorCode = PERMISSION_DENIED
class IsNotADirectoryError(FTPCmdError):
"""
Raised when RMD is called on a path that isn't a directory.
"""
errorCode = IS_NOT_A_DIR
class FileExistsError(FTPCmdError):
"""
Raised when attempted to override an existing resource.
"""
errorCode = FILE_EXISTS
class IsADirectoryError(FTPCmdError):
"""
Raised when DELE is called on a path that is a directory.
"""
errorCode = IS_A_DIR
class CmdSyntaxError(FTPCmdError):
"""
Raised when a command syntax is wrong.
"""
errorCode = SYNTAX_ERR
class CmdArgSyntaxError(FTPCmdError):
"""
Raised when a command is called with wrong value or a wrong number of
arguments.
"""
errorCode = SYNTAX_ERR_IN_ARGS
class CmdNotImplementedError(FTPCmdError):
"""
Raised when an unimplemented command is given to the server.
"""
errorCode = CMD_NOT_IMPLMNTD
class CmdNotImplementedForArgError(FTPCmdError):
"""
Raised when the handling of a parameter for a command is not implemented by
the server.
"""
errorCode = CMD_NOT_IMPLMNTD_FOR_PARAM
class FTPError(Exception):
pass
class PortConnectionError(Exception):
pass
class BadCmdSequenceError(FTPCmdError):
"""
Raised when a client sends a series of commands in an illogical sequence.
"""
errorCode = BAD_CMD_SEQ
class AuthorizationError(FTPCmdError):
"""
Raised when client authentication fails.
"""
errorCode = AUTH_FAILURE
def debugDeferred(self, *_):
log.msg("debugDeferred(): %s" % str(_), debug=True)
# -- DTP Protocol --
_months = [
None,
"Jan",
"Feb",
"Mar",
"Apr",
"May",
"Jun",
"Jul",
"Aug",
"Sep",
"Oct",
"Nov",
"Dec",
]
@implementer(interfaces.IConsumer)
class DTP(protocol.Protocol):
isConnected = False
_cons = None
_onConnLost = None
_buffer = None
_encoding = "latin-1"
def connectionMade(self):
self.isConnected = True
self.factory.deferred.callback(None)
self._buffer = []
def connectionLost(self, reason):
self.isConnected = False
if self._onConnLost is not None:
self._onConnLost.callback(None)
def sendLine(self, line):
"""
Send a line to data channel.
@param line: The line to be sent.
@type line: L{bytes}
"""
self.transport.write(line + b"\r\n")
def _formatOneListResponse(
self, name, size, directory, permissions, hardlinks, modified, owner, group
):
"""
Helper method to format one entry's info into a text entry like:
'drwxrwxrwx 0 user group 0 Jan 01 1970 filename.txt'
@param name: C{bytes} name of the entry (file or directory or link)
@param size: C{int} size of the entry
@param directory: evals to C{bool} - whether the entry is a directory
@param permissions: L{twisted.python.filepath.Permissions} object
representing that entry's permissions
@param hardlinks: C{int} number of hardlinks
@param modified: C{float} - entry's last modified time in seconds
since the epoch
@param owner: C{str} username of the owner
@param group: C{str} group name of the owner
@return: C{str} in the requisite format
"""
def formatDate(mtime):
now = time.gmtime()
info = {
"month": _months[mtime.tm_mon],
"day": mtime.tm_mday,
"year": mtime.tm_year,
"hour": mtime.tm_hour,
"minute": mtime.tm_min,
}
if now.tm_year != mtime.tm_year:
return "%(month)s %(day)02d %(year)5d" % info
else:
return "%(month)s %(day)02d %(hour)02d:%(minute)02d" % info
format = (
"%(directory)s%(permissions)s%(hardlinks)4d "
"%(owner)-9s %(group)-9s %(size)15d %(date)12s "
)
msg = (
format
% {
"directory": directory and "d" or "-",
"permissions": permissions.shorthand(),
"hardlinks": hardlinks,
"owner": owner[:8],
"group": group[:8],
"size": size,
"date": formatDate(time.gmtime(modified)),
}
).encode(self._encoding)
return msg + name
def sendListResponse(self, name, response):
self.sendLine(self._formatOneListResponse(name, *response))
# Proxy IConsumer to our transport
def registerProducer(self, producer, streaming):
return self.transport.registerProducer(producer, streaming)
def unregisterProducer(self):
self.transport.unregisterProducer()
self.transport.loseConnection()
def write(self, data):
if self.isConnected:
return self.transport.write(data)
raise Exception("Crap damn crap damn crap damn")
# Pretend to be a producer, too.
def _conswrite(self, bytes):
try:
self._cons.write(bytes)
except BaseException:
self._onConnLost.errback()
def dataReceived(self, bytes):
if self._cons is not None:
self._conswrite(bytes)
else:
self._buffer.append(bytes)
def _unregConsumer(self, ignored):
self._cons.unregisterProducer()
self._cons = None
del self._onConnLost
return ignored
def registerConsumer(self, cons):
assert self._cons is None
self._cons = cons
self._cons.registerProducer(self, True)
for chunk in self._buffer:
self._conswrite(chunk)
self._buffer = None
if self.isConnected:
self._onConnLost = d = defer.Deferred()
d.addBoth(self._unregConsumer)
return d
else:
self._cons.unregisterProducer()
self._cons = None
return defer.succeed(None)
def resumeProducing(self):
self.transport.resumeProducing()
def pauseProducing(self):
self.transport.pauseProducing()
def stopProducing(self):
self.transport.stopProducing()
class DTPFactory(protocol.ClientFactory):
"""
Client factory for I{data transfer process} protocols.
@ivar peerCheck: perform checks to make sure the ftp-pi's peer is the same
as the dtp's
@ivar pi: a reference to this factory's protocol interpreter
@ivar _state: Indicates the current state of the DTPFactory. Initially,
this is L{_IN_PROGRESS}. If the connection fails or times out, it is
L{_FAILED}. If the connection succeeds before the timeout, it is
L{_FINISHED}.
@cvar _IN_PROGRESS: Token to signal that connection is active.
@type _IN_PROGRESS: L{object}.
@cvar _FAILED: Token to signal that connection has failed.
@type _FAILED: L{object}.
@cvar _FINISHED: Token to signal that connection was successfully closed.
@type _FINISHED: L{object}.
"""
_IN_PROGRESS = object()
_FAILED = object()
_FINISHED = object()
_state = _IN_PROGRESS
# -- configuration variables --
peerCheck = False
# -- class variables --
def __init__(self, pi, peerHost=None, reactor=None):
"""
Constructor
@param pi: this factory's protocol interpreter
@param peerHost: if peerCheck is True, this is the tuple that the
generated instance will use to perform security checks
"""
self.pi = pi
self.peerHost = peerHost # from FTP.transport.peerHost()
# deferred will fire when instance is connected
self.deferred = defer.Deferred()
self.delayedCall = None
if reactor is None:
from twisted.internet import reactor
self._reactor = reactor
def buildProtocol(self, addr):
log.msg("DTPFactory.buildProtocol", debug=True)
if self._state is not self._IN_PROGRESS:
return None
self._state = self._FINISHED
self.cancelTimeout()
p = DTP()
p.factory = self
p.pi = self.pi
self.pi.dtpInstance = p
return p
def stopFactory(self):
log.msg("dtpFactory.stopFactory", debug=True)
self.cancelTimeout()
def timeoutFactory(self):
log.msg("timed out waiting for DTP connection")
if self._state is not self._IN_PROGRESS:
return
self._state = self._FAILED
d = self.deferred
self.deferred = None
d.errback(PortConnectionError(defer.TimeoutError("DTPFactory timeout")))
def cancelTimeout(self):
if self.delayedCall is not None and self.delayedCall.active():
log.msg("cancelling DTP timeout", debug=True)
self.delayedCall.cancel()
def setTimeout(self, seconds):
log.msg("DTPFactory.setTimeout set to %s seconds" % seconds)
self.delayedCall = self._reactor.callLater(seconds, self.timeoutFactory)
def clientConnectionFailed(self, connector, reason):
if self._state is not self._IN_PROGRESS:
return
self._state = self._FAILED
d = self.deferred
self.deferred = None
d.errback(PortConnectionError(reason))
# -- FTP-PI (Protocol Interpreter) --
class ASCIIConsumerWrapper:
def __init__(self, cons):
self.cons = cons
self.registerProducer = cons.registerProducer
self.unregisterProducer = cons.unregisterProducer
assert (
os.linesep == "\r\n" or len(os.linesep) == 1
), "Unsupported platform (yea right like this even exists)"
if os.linesep == "\r\n":
self.write = cons.write
def write(self, bytes):
return self.cons.write(bytes.replace(os.linesep, "\r\n"))
@implementer(interfaces.IConsumer)
class FileConsumer:
"""
A consumer for FTP input that writes data to a file.
@ivar fObj: a file object opened for writing, used to write data received.
@type fObj: C{file}
"""
def __init__(self, fObj):
self.fObj = fObj
def registerProducer(self, producer, streaming):
self.producer = producer
assert streaming
def unregisterProducer(self):
self.producer = None
self.fObj.close()
def write(self, bytes):
self.fObj.write(bytes)
class FTPOverflowProtocol(basic.LineReceiver):
"""FTP mini-protocol for when there are too many connections."""
_encoding = "latin-1"
def connectionMade(self):
self.sendLine(RESPONSE[TOO_MANY_CONNECTIONS].encode(self._encoding))
self.transport.loseConnection()
class FTP(basic.LineReceiver, policies.TimeoutMixin):
"""
Protocol Interpreter for the File Transfer Protocol
@ivar state: The current server state. One of L{UNAUTH},
L{INAUTH}, L{AUTHED}, L{RENAMING}.
@ivar shell: The connected avatar
@ivar binary: The transfer mode. If false, ASCII.
@ivar dtpFactory: Generates a single DTP for this session
@ivar dtpPort: Port returned from listenTCP
@ivar listenFactory: A callable with the signature of
L{twisted.internet.interfaces.IReactorTCP.listenTCP} which will be used
to create Ports for passive connections (mainly for testing).
@ivar passivePortRange: iterator used as source of passive port numbers.
@type passivePortRange: C{iterator}
@cvar UNAUTH: Command channel is not yet authenticated.
@type UNAUTH: L{int}
@cvar INAUTH: Command channel is in the process of being authenticated.
@type INAUTH: L{int}
@cvar AUTHED: Command channel was successfully authenticated.
@type AUTHED: L{int}
@cvar RENAMING: Command channel is between the renaming command sequence.
@type RENAMING: L{int}
"""
disconnected = False
# States an FTP can be in
UNAUTH, INAUTH, AUTHED, RENAMING = range(4)
# how long the DTP waits for a connection
dtpTimeout = 10
portal = None
shell = None
dtpFactory = None
dtpPort = None
dtpInstance = None
binary = True
PUBLIC_COMMANDS = ["FEAT", "QUIT"]
FEATURES = ["FEAT", "MDTM", "PASV", "SIZE", "TYPE A;I"]
passivePortRange = range(0, 1)
listenFactory = reactor.listenTCP # type: ignore[attr-defined]
_encoding = "latin-1"
def reply(self, key, *args):
msg = RESPONSE[key] % args
self.sendLine(msg)
def sendLine(self, line):
"""
(Private) Encodes and sends a line
@param line: L{bytes} or L{unicode}
"""
if isinstance(line, str):
line = line.encode(self._encoding)
super().sendLine(line)
def connectionMade(self):
self.state = self.UNAUTH
self.setTimeout(self.timeOut)
self.reply(WELCOME_MSG, self.factory.welcomeMessage)
def connectionLost(self, reason):
# if we have a DTP protocol instance running and
# we lose connection to the client's PI, kill the
# DTP connection and close the port
if self.dtpFactory:
self.cleanupDTP()
self.setTimeout(None)
if hasattr(self.shell, "logout") and self.shell.logout is not None:
self.shell.logout()
self.shell = None
self.transport = None
def timeoutConnection(self):
self.transport.loseConnection()
def lineReceived(self, line):
self.resetTimeout()
self.pauseProducing()
if bytes != str:
line = line.decode(self._encoding)
def processFailed(err):
if err.check(FTPCmdError):
self.sendLine(err.value.response())
elif err.check(TypeError) and any(
msg in err.value.args[0]
for msg in ("takes exactly", "required positional argument")
):
self.reply(SYNTAX_ERR, f"{cmd} requires an argument.")
else:
log.msg("Unexpected FTP error")
log.err(err)
self.reply(REQ_ACTN_NOT_TAKEN, "internal server error")
def processSucceeded(result):
if isinstance(result, tuple):
self.reply(*result)
elif result is not None:
self.reply(result)
def allDone(ignored):
if not self.disconnected:
self.resumeProducing()
spaceIndex = line.find(" ")
if spaceIndex != -1:
cmd = line[:spaceIndex]
args = (line[spaceIndex + 1 :],)
else:
cmd = line
args = ()
d = defer.maybeDeferred(self.processCommand, cmd, *args)
d.addCallbacks(processSucceeded, processFailed)
d.addErrback(log.err)
# XXX It burnsss
# LineReceiver doesn't let you resumeProducing inside
# lineReceived atm
from twisted.internet import reactor
reactor.callLater(0, d.addBoth, allDone)
def processCommand(self, cmd, *params):
def call_ftp_command(command):
method = getattr(self, "ftp_" + command, None)
if method is not None:
return method(*params)
return defer.fail(CmdNotImplementedError(command))
cmd = cmd.upper()
if cmd in self.PUBLIC_COMMANDS:
return call_ftp_command(cmd)
elif self.state == self.UNAUTH:
if cmd == "USER":
return self.ftp_USER(*params)
elif cmd == "PASS":
return BAD_CMD_SEQ, "USER required before PASS"
else:
return NOT_LOGGED_IN
elif self.state == self.INAUTH:
if cmd == "PASS":
return self.ftp_PASS(*params)
else:
return BAD_CMD_SEQ, "PASS required after USER"
elif self.state == self.AUTHED:
return call_ftp_command(cmd)
elif self.state == self.RENAMING:
if cmd == "RNTO":
return self.ftp_RNTO(*params)
else:
return BAD_CMD_SEQ, "RNTO required after RNFR"
def getDTPPort(self, factory):
"""
Return a port for passive access, using C{self.passivePortRange}
attribute.
"""
for portn in self.passivePortRange:
try:
dtpPort = self.listenFactory(portn, factory)
except error.CannotListenError:
continue
else:
return dtpPort
raise error.CannotListenError(
"", portn, f"No port available in range {self.passivePortRange}"
)
def ftp_USER(self, username):
"""
First part of login. Get the username the peer wants to
authenticate as.
"""
if not username:
return defer.fail(CmdSyntaxError("USER requires an argument"))
self._user = username
self.state = self.INAUTH
if self.factory.allowAnonymous and self._user == self.factory.userAnonymous:
return GUEST_NAME_OK_NEED_EMAIL
else:
return (USR_NAME_OK_NEED_PASS, username)
# TODO: add max auth try before timeout from ip...
# TODO: need to implement minimal ABOR command
def ftp_PASS(self, password):
"""
Second part of login. Get the password the peer wants to
authenticate with.
"""
if self.factory.allowAnonymous and self._user == self.factory.userAnonymous:
# anonymous login
creds = credentials.Anonymous()
reply = GUEST_LOGGED_IN_PROCEED
else:
# user login
creds = credentials.UsernamePassword(self._user, password)
reply = USR_LOGGED_IN_PROCEED
del self._user
def _cbLogin(result):
(interface, avatar, logout) = result
assert interface is IFTPShell, "The realm is busted, jerk."
self.shell = avatar
self.logout = logout
self.workingDirectory = []
self.state = self.AUTHED
return reply
def _ebLogin(failure):
failure.trap(cred_error.UnauthorizedLogin, cred_error.UnhandledCredentials)
self.state = self.UNAUTH
raise AuthorizationError
d = self.portal.login(creds, None, IFTPShell)
d.addCallbacks(_cbLogin, _ebLogin)
return d
def ftp_PASV(self):
"""
Request for a passive connection
from the rfc::
This command requests the server-DTP to \"listen\" on a data port
(which is not its default data port) and to wait for a connection
rather than initiate one upon receipt of a transfer command. The
response to this command includes the host and port address this
server is listening on.
"""
# if we have a DTP port set up, lose it.
if self.dtpFactory is not None:
# cleanupDTP sets dtpFactory to none. Later we'll do
# cleanup here or something.
self.cleanupDTP()
self.dtpFactory = DTPFactory(pi=self)
self.dtpFactory.setTimeout(self.dtpTimeout)
self.dtpPort = self.getDTPPort(self.dtpFactory)
host = self.transport.getHost().host
port = self.dtpPort.getHost().port
self.reply(ENTERING_PASV_MODE, encodeHostPort(host, port))
return self.dtpFactory.deferred.addCallback(lambda ign: None)
def ftp_PORT(self, address):
addr = tuple(map(int, address.split(",")))
ip = "%d.%d.%d.%d" % tuple(addr[:4])
port = addr[4] << 8 | addr[5]
# if we have a DTP port set up, lose it.
if self.dtpFactory is not None:
self.cleanupDTP()
self.dtpFactory = DTPFactory(pi=self, peerHost=self.transport.getPeer().host)
self.dtpFactory.setTimeout(self.dtpTimeout)
self.dtpPort = reactor.connectTCP(ip, port, self.dtpFactory)
def connected(ignored):
return ENTERING_PORT_MODE
def connFailed(err):
err.trap(PortConnectionError)
return CANT_OPEN_DATA_CNX
return self.dtpFactory.deferred.addCallbacks(connected, connFailed)
def _encodeName(self, name):
"""
Encode C{name} to be sent over the wire.
This encodes L{unicode} objects as UTF-8 and leaves L{bytes} as-is.
As described by U{RFC 3659 section
2.2<https://tools.ietf.org/html/rfc3659#section-2.2>}::
Various FTP commands take pathnames as arguments, or return
pathnames in responses. When the MLST command is supported, as
indicated in the response to the FEAT command, pathnames are to be
transferred in one of the following two formats.
pathname = utf-8-name / raw
utf-8-name = <a UTF-8 encoded Unicode string>
raw = <any string that is not a valid UTF-8 encoding>
Which format is used is at the option of the user-PI or server-PI
sending the pathname.
@param name: Name to be encoded.
@type name: L{bytes} or L{unicode}
@return: Wire format of C{name}.
@rtype: L{bytes}
"""
if isinstance(name, str):
return name.encode("utf-8")
return name
def ftp_LIST(self, path=""):
"""This command causes a list to be sent from the server to the
passive DTP. If the pathname specifies a directory or other
group of files, the server should transfer a list of files
in the specified directory. If the pathname specifies a
file then the server should send current information on the
file. A null argument implies the user's current working or
default directory.
"""
# XXX: why is this check different from ftp_RETR/ftp_STOR? See #4180
if self.dtpInstance is None or not self.dtpInstance.isConnected:
return defer.fail(BadCmdSequenceError("must send PORT or PASV before RETR"))
# Various clients send flags like -L or -al etc. We just ignore them.
if path.lower() in ["-a", "-l", "-la", "-al"]:
path = ""
def gotListing(results):
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
for (name, attrs) in results:
name = self._encodeName(name)
self.dtpInstance.sendListResponse(name, attrs)
self.dtpInstance.transport.loseConnection()
return (TXFR_COMPLETE_OK,)
try:
segments = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
d = self.shell.list(
segments,
(
"size",
"directory",
"permissions",
"hardlinks",
"modified",
"owner",
"group",
),
)
d.addCallback(gotListing)
return d
def ftp_NLST(self, path):
"""
This command causes a directory listing to be sent from the server to
the client. The pathname should specify a directory or other
system-specific file group descriptor. An empty path implies the
current working directory. If the path is non-existent, send nothing.
If the path is to a file, send only the file name.
@type path: C{str}
@param path: The path for which a directory listing should be returned.
@rtype: L{Deferred}
@return: a L{Deferred} which will be fired when the listing request
is finished.
"""
# XXX: why is this check different from ftp_RETR/ftp_STOR? See #4180
if self.dtpInstance is None or not self.dtpInstance.isConnected:
return defer.fail(BadCmdSequenceError("must send PORT or PASV before RETR"))
try:
segments = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
def cbList(results, glob):
"""
Send, line by line, each matching file in the directory listing,
and then close the connection.
@type results: A C{list} of C{tuple}. The first element of each
C{tuple} is a C{str} and the second element is a C{list}.
@param results: The names of the files in the directory.
@param glob: A shell-style glob through which to filter results
(see U{http://docs.python.org/2/library/fnmatch.html}), or
L{None} for no filtering.
@type glob: L{str} or L{None}
@return: A C{tuple} containing the status code for a successful
transfer.
@rtype: C{tuple}
"""
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
for (name, ignored) in results:
if not glob or (glob and fnmatch.fnmatch(name, glob)):
name = self._encodeName(name)
self.dtpInstance.sendLine(name)
self.dtpInstance.transport.loseConnection()
return (TXFR_COMPLETE_OK,)
def listErr(results):
"""
RFC 959 specifies that an NLST request may only return directory
listings. Thus, send nothing and just close the connection.
@type results: L{Failure}
@param results: The L{Failure} wrapping a L{FileNotFoundError} that
occurred while trying to list the contents of a nonexistent
directory.
@returns: A C{tuple} containing the status code for a successful
transfer.
@rtype: C{tuple}
"""
self.dtpInstance.transport.loseConnection()
return (TXFR_COMPLETE_OK,)
if _isGlobbingExpression(segments):
# Remove globbing expression from path
# and keep to be used for filtering.
glob = segments.pop()
else:
glob = None
d = self.shell.list(segments)
d.addCallback(cbList, glob)
# self.shell.list will generate an error if the path is invalid
d.addErrback(listErr)
return d
def ftp_CWD(self, path):
try:
segments = toSegments(self.workingDirectory, path)
except InvalidPath:
# XXX Eh, what to fail with here?
return defer.fail(FileNotFoundError(path))
def accessGranted(result):
self.workingDirectory = segments
return (REQ_FILE_ACTN_COMPLETED_OK,)
return self.shell.access(segments).addCallback(accessGranted)
def ftp_CDUP(self):
return self.ftp_CWD("..")
def ftp_PWD(self):
return (PWD_REPLY, "/" + "/".join(self.workingDirectory))
def ftp_RETR(self, path):
"""
This command causes the content of a file to be sent over the data
transfer channel. If the path is to a folder, an error will be raised.
@type path: C{str}
@param path: The path to the file which should be transferred over the
data transfer channel.
@rtype: L{Deferred}
@return: a L{Deferred} which will be fired when the transfer is done.
"""
if self.dtpInstance is None:
raise BadCmdSequenceError("PORT or PASV required before RETR")
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
# XXX For now, just disable the timeout. Later we'll want to
# leave it active and have the DTP connection reset it
# periodically.
self.setTimeout(None)
# Put it back later
def enableTimeout(result):
self.setTimeout(self.factory.timeOut)
return result
# And away she goes
if not self.binary:
cons = ASCIIConsumerWrapper(self.dtpInstance)
else:
cons = self.dtpInstance
def cbSent(result):
return (TXFR_COMPLETE_OK,)
def ebSent(err):
log.msg("Unexpected error attempting to transmit file to client:")
log.err(err)
if err.check(FTPCmdError):
return err
return (CNX_CLOSED_TXFR_ABORTED,)
def cbOpened(file):
# Tell them what to doooo
if self.dtpInstance.isConnected:
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
else:
self.reply(FILE_STATUS_OK_OPEN_DATA_CNX)
d = file.send(cons)
d.addCallbacks(cbSent, ebSent)
return d
def ebOpened(err):
if not err.check(
PermissionDeniedError, FileNotFoundError, IsADirectoryError
):
log.msg("Unexpected error attempting to open file for " "transmission:")
log.err(err)
if err.check(FTPCmdError):
return (err.value.errorCode, "/".join(newsegs))
return (FILE_NOT_FOUND, "/".join(newsegs))
d = self.shell.openForReading(newsegs)
d.addCallbacks(cbOpened, ebOpened)
d.addBoth(enableTimeout)
# Pass back Deferred that fires when the transfer is done
return d
def ftp_STOR(self, path):
"""
STORE (STOR)
This command causes the server-DTP to accept the data
transferred via the data connection and to store the data as
a file at the server site. If the file specified in the
pathname exists at the server site, then its contents shall
be replaced by the data being transferred. A new file is
created at the server site if the file specified in the
pathname does not already exist.
"""
if self.dtpInstance is None:
raise BadCmdSequenceError("PORT or PASV required before STOR")
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
# XXX For now, just disable the timeout. Later we'll want to
# leave it active and have the DTP connection reset it
# periodically.
self.setTimeout(None)
# Put it back later
def enableTimeout(result):
self.setTimeout(self.factory.timeOut)
return result
def cbOpened(file):
"""
File was open for reading. Launch the data transfer channel via
the file consumer.
"""
d = file.receive()
d.addCallback(cbConsumer)
d.addCallback(lambda ignored: file.close())
d.addCallbacks(cbSent, ebSent)
return d
def ebOpened(err):
"""
Called when failed to open the file for reading.
For known errors, return the FTP error code.
For all other, return a file not found error.
"""
if isinstance(err.value, FTPCmdError):
return (err.value.errorCode, "/".join(newsegs))
log.err(err, "Unexpected error received while opening file:")
return (FILE_NOT_FOUND, "/".join(newsegs))
def cbConsumer(cons):
"""
Called after the file was opended for reading.
Prepare the data transfer channel and send the response
to the command channel.
"""
if not self.binary:
cons = ASCIIConsumerWrapper(cons)
d = self.dtpInstance.registerConsumer(cons)
# Tell them what to doooo
if self.dtpInstance.isConnected:
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
else:
self.reply(FILE_STATUS_OK_OPEN_DATA_CNX)
return d
def cbSent(result):
"""
Called from data transport when transfer is done.
"""
return (TXFR_COMPLETE_OK,)
def ebSent(err):
"""
Called from data transport when there are errors during the
transfer.
"""
log.err(err, "Unexpected error received during transfer:")
if err.check(FTPCmdError):
return err
return (CNX_CLOSED_TXFR_ABORTED,)
d = self.shell.openForWriting(newsegs)
d.addCallbacks(cbOpened, ebOpened)
d.addBoth(enableTimeout)
# Pass back Deferred that fires when the transfer is done
return d
def ftp_SIZE(self, path):
"""
File SIZE
The FTP command, SIZE OF FILE (SIZE), is used to obtain the transfer
size of a file from the server-FTP process. This is the exact number
of octets (8 bit bytes) that would be transmitted over the data
connection should that file be transmitted. This value will change
depending on the current STRUcture, MODE, and TYPE of the data
connection or of a data connection that would be created were one
created now. Thus, the result of the SIZE command is dependent on
the currently established STRU, MODE, and TYPE parameters.
The SIZE command returns how many octets would be transferred if the
file were to be transferred using the current transfer structure,
mode, and type. This command is normally used in conjunction with
the RESTART (REST) command when STORing a file to a remote server in
STREAM mode, to determine the restart point. The server-PI might
need to read the partially transferred file, do any appropriate
conversion, and count the number of octets that would be generated
when sending the file in order to correctly respond to this command.
Estimates of the file transfer size MUST NOT be returned; only
precise information is acceptable.
http://tools.ietf.org/html/rfc3659
"""
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
def cbStat(result):
(size,) = result
return (FILE_STATUS, str(size))
return self.shell.stat(newsegs, ("size",)).addCallback(cbStat)
def ftp_MDTM(self, path):
"""
File Modification Time (MDTM)
The FTP command, MODIFICATION TIME (MDTM), can be used to determine
when a file in the server NVFS was last modified. This command has
existed in many FTP servers for many years, as an adjunct to the REST
command for STREAM mode, thus is widely available. However, where
supported, the "modify" fact that can be provided in the result from
the new MLST command is recommended as a superior alternative.
http://tools.ietf.org/html/rfc3659
"""
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
def cbStat(result):
(modified,) = result
return (FILE_STATUS, time.strftime("%Y%m%d%H%M%S", time.gmtime(modified)))
return self.shell.stat(newsegs, ("modified",)).addCallback(cbStat)
def ftp_TYPE(self, type):
"""
REPRESENTATION TYPE (TYPE)
The argument specifies the representation type as described
in the Section on Data Representation and Storage. Several
types take a second parameter. The first parameter is
denoted by a single Telnet character, as is the second
Format parameter for ASCII and EBCDIC; the second parameter
for local byte is a decimal integer to indicate Bytesize.
The parameters are separated by a <SP> (Space, ASCII code
32).
"""
p = type.upper()
if p:
f = getattr(self, "type_" + p[0], None)
if f is not None:
return f(p[1:])
return self.type_UNKNOWN(p)
return (SYNTAX_ERR,)
def type_A(self, code):
if code == "" or code == "N":
self.binary = False
return (TYPE_SET_OK, "A" + code)
else:
return defer.fail(CmdArgSyntaxError(code))
def type_I(self, code):
if code == "":
self.binary = True
return (TYPE_SET_OK, "I")
else:
return defer.fail(CmdArgSyntaxError(code))
def type_UNKNOWN(self, code):
return defer.fail(CmdNotImplementedForArgError(code))
def ftp_SYST(self):
return NAME_SYS_TYPE
def ftp_STRU(self, structure):
p = structure.upper()
if p == "F":
return (CMD_OK,)
return defer.fail(CmdNotImplementedForArgError(structure))
def ftp_MODE(self, mode):
p = mode.upper()
if p == "S":
return (CMD_OK,)
return defer.fail(CmdNotImplementedForArgError(mode))
def ftp_MKD(self, path):
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
return self.shell.makeDirectory(newsegs).addCallback(
lambda ign: (MKD_REPLY, path)
)
def ftp_RMD(self, path):
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
return self.shell.removeDirectory(newsegs).addCallback(
lambda ign: (REQ_FILE_ACTN_COMPLETED_OK,)
)
def ftp_DELE(self, path):
try:
newsegs = toSegments(self.workingDirectory, path)
except InvalidPath:
return defer.fail(FileNotFoundError(path))
return self.shell.removeFile(newsegs).addCallback(
lambda ign: (REQ_FILE_ACTN_COMPLETED_OK,)
)
def ftp_NOOP(self):
return (CMD_OK,)
def ftp_RNFR(self, fromName):
self._fromName = fromName
self.state = self.RENAMING
return (REQ_FILE_ACTN_PENDING_FURTHER_INFO,)
def ftp_RNTO(self, toName):
fromName = self._fromName
del self._fromName
self.state = self.AUTHED
try:
fromsegs = toSegments(self.workingDirectory, fromName)
tosegs = toSegments(self.workingDirectory, toName)
except InvalidPath:
return defer.fail(FileNotFoundError(fromName))
return self.shell.rename(fromsegs, tosegs).addCallback(
lambda ign: (REQ_FILE_ACTN_COMPLETED_OK,)
)
def ftp_FEAT(self):
"""
Advertise the features supported by the server.
http://tools.ietf.org/html/rfc2389
"""
self.sendLine(RESPONSE[FEAT_OK][0])
for feature in self.FEATURES:
self.sendLine(" " + feature)
self.sendLine(RESPONSE[FEAT_OK][1])
def ftp_OPTS(self, option):
"""
Handle OPTS command.
http://tools.ietf.org/html/draft-ietf-ftpext-utf-8-option-00
"""
return self.reply(OPTS_NOT_IMPLEMENTED, option)
def ftp_QUIT(self):
self.reply(GOODBYE_MSG)
self.transport.loseConnection()
self.disconnected = True
def cleanupDTP(self):
"""
Call when DTP connection exits
"""
log.msg("cleanupDTP", debug=True)
log.msg(self.dtpPort)
dtpPort, self.dtpPort = self.dtpPort, None
if interfaces.IListeningPort.providedBy(dtpPort):
dtpPort.stopListening()
elif interfaces.IConnector.providedBy(dtpPort):
dtpPort.disconnect()
else:
assert False, (
"dtpPort should be an IListeningPort or IConnector, "
"instead is %r" % (dtpPort,)
)
self.dtpFactory.stopFactory()
self.dtpFactory = None
if self.dtpInstance is not None:
self.dtpInstance = None
class FTPFactory(policies.LimitTotalConnectionsFactory):
"""
A factory for producing ftp protocol instances
@ivar timeOut: the protocol interpreter's idle timeout time in seconds,
default is 600 seconds.
@ivar passivePortRange: value forwarded to C{protocol.passivePortRange}.
@type passivePortRange: C{iterator}
"""
protocol = FTP
overflowProtocol = FTPOverflowProtocol
allowAnonymous = True
userAnonymous = "anonymous"
timeOut = 600
welcomeMessage = f"Twisted {copyright.version} FTP Server"
passivePortRange = range(0, 1)
def __init__(self, portal=None, userAnonymous="anonymous"):
self.portal = portal
self.userAnonymous = userAnonymous
self.instances = []
def buildProtocol(self, addr):
p = policies.LimitTotalConnectionsFactory.buildProtocol(self, addr)
if p is not None:
p.wrappedProtocol.portal = self.portal
p.wrappedProtocol.timeOut = self.timeOut
p.wrappedProtocol.passivePortRange = self.passivePortRange
return p
def stopFactory(self):
# make sure ftp instance's timeouts are set to None
# to avoid reactor complaints
[p.setTimeout(None) for p in self.instances if p.timeOut is not None]
policies.LimitTotalConnectionsFactory.stopFactory(self)
# -- Cred Objects --
class IFTPShell(Interface):
"""
An abstraction of the shell commands used by the FTP protocol for
a given user account.
All path names must be absolute.
"""
def makeDirectory(path):
"""
Create a directory.
@param path: The path, as a list of segments, to create
@type path: C{list} of C{unicode}
@return: A Deferred which fires when the directory has been
created, or which fails if the directory cannot be created.
"""
def removeDirectory(path):
"""
Remove a directory.
@param path: The path, as a list of segments, to remove
@type path: C{list} of C{unicode}
@return: A Deferred which fires when the directory has been
removed, or which fails if the directory cannot be removed.
"""
def removeFile(path):
"""
Remove a file.
@param path: The path, as a list of segments, to remove
@type path: C{list} of C{unicode}
@return: A Deferred which fires when the file has been
removed, or which fails if the file cannot be removed.
"""
def rename(fromPath, toPath):
"""
Rename a file or directory.
@param fromPath: The current name of the path.
@type fromPath: C{list} of C{unicode}
@param toPath: The desired new name of the path.
@type toPath: C{list} of C{unicode}
@return: A Deferred which fires when the path has been
renamed, or which fails if the path cannot be renamed.
"""
def access(path):
"""
Determine whether access to the given path is allowed.
@param path: The path, as a list of segments
@return: A Deferred which fires with None if access is allowed
or which fails with a specific exception type if access is
denied.
"""
def stat(path, keys=()):
"""
Retrieve information about the given path.
This is like list, except it will never return results about
child paths.
"""
def list(path, keys=()):
"""
Retrieve information about the given path.
If the path represents a non-directory, the result list should
have only one entry with information about that non-directory.
Otherwise, the result list should have an element for each
child of the directory.
@param path: The path, as a list of segments, to list
@type path: C{list} of C{unicode} or C{bytes}
@param keys: A tuple of keys desired in the resulting
dictionaries.
@return: A Deferred which fires with a list of (name, list),
where the name is the name of the entry as a unicode string or
bytes and each list contains values corresponding to the requested
keys. The following are possible elements of keys, and the
values which should be returned for them:
- C{'size'}: size in bytes, as an integer (this is kinda required)
- C{'directory'}: boolean indicating the type of this entry
- C{'permissions'}: a bitvector (see os.stat(foo).st_mode)
- C{'hardlinks'}: Number of hard links to this entry
- C{'modified'}: number of seconds since the epoch since entry was
modified
- C{'owner'}: string indicating the user owner of this entry
- C{'group'}: string indicating the group owner of this entry
"""
def openForReading(path):
"""
@param path: The path, as a list of segments, to open
@type path: C{list} of C{unicode}
@rtype: C{Deferred} which will fire with L{IReadFile}
"""
def openForWriting(path):
"""
@param path: The path, as a list of segments, to open
@type path: C{list} of C{unicode}
@rtype: C{Deferred} which will fire with L{IWriteFile}
"""
class IReadFile(Interface):
"""
A file out of which bytes may be read.
"""
def send(consumer):
"""
Produce the contents of the given path to the given consumer. This
method may only be invoked once on each provider.
@type consumer: C{IConsumer}
@return: A Deferred which fires when the file has been
consumed completely.
"""
class IWriteFile(Interface):
"""
A file into which bytes may be written.
"""
def receive():
"""
Create a consumer which will write to this file. This method may
only be invoked once on each provider.
@rtype: C{Deferred} of C{IConsumer}
"""
def close():
"""
Perform any post-write work that needs to be done. This method may
only be invoked once on each provider, and will always be invoked
after receive().
@rtype: C{Deferred} of anything: the value is ignored. The FTP client
will not see their upload request complete until this Deferred has
been fired.
"""
def _getgroups(uid):
"""
Return the primary and supplementary groups for the given UID.
@type uid: C{int}
"""
result = []
pwent = pwd.getpwuid(uid)
result.append(pwent.pw_gid)
for grent in grp.getgrall():
if pwent.pw_name in grent.gr_mem:
result.append(grent.gr_gid)
return result
def _testPermissions(uid, gid, spath, mode="r"):
"""
checks to see if uid has proper permissions to access path with mode
@type uid: C{int}
@param uid: numeric user id
@type gid: C{int}
@param gid: numeric group id
@type spath: C{str}
@param spath: the path on the server to test
@type mode: C{str}
@param mode: 'r' or 'w' (read or write)
@rtype: C{bool}
@return: True if the given credentials have the specified form of
access to the given path
"""
if mode == "r":
usr = stat.S_IRUSR
grp = stat.S_IRGRP
oth = stat.S_IROTH
amode = os.R_OK
elif mode == "w":
usr = stat.S_IWUSR
grp = stat.S_IWGRP
oth = stat.S_IWOTH
amode = os.W_OK
else:
raise ValueError(f"Invalid mode {mode!r}: must specify 'r' or 'w'")
access = False
if os.path.exists(spath):
if uid == 0:
access = True
else:
s = os.stat(spath)
if usr & s.st_mode and uid == s.st_uid:
access = True
elif grp & s.st_mode and gid in _getgroups(uid):
access = True
elif oth & s.st_mode:
access = True
if access:
if not os.access(spath, amode):
access = False
log.msg(
"Filesystem grants permission to UID %d but it is "
"inaccessible to me running as UID %d" % (uid, os.getuid())
)
return access
@implementer(IFTPShell)
class FTPAnonymousShell:
"""
An anonymous implementation of IFTPShell
@type filesystemRoot: L{twisted.python.filepath.FilePath}
@ivar filesystemRoot: The path which is considered the root of
this shell.
"""
def __init__(self, filesystemRoot):
self.filesystemRoot = filesystemRoot
def _path(self, path):
return self.filesystemRoot.descendant(path)
def makeDirectory(self, path):
return defer.fail(AnonUserDeniedError())
def removeDirectory(self, path):
return defer.fail(AnonUserDeniedError())
def removeFile(self, path):
return defer.fail(AnonUserDeniedError())
def rename(self, fromPath, toPath):
return defer.fail(AnonUserDeniedError())
def receive(self, path):
path = self._path(path)
return defer.fail(AnonUserDeniedError())
def openForReading(self, path):
"""
Open C{path} for reading.
@param path: The path, as a list of segments, to open.
@type path: C{list} of C{unicode}
@return: A L{Deferred} is returned that will fire with an object
implementing L{IReadFile} if the file is successfully opened. If
C{path} is a directory, or if an exception is raised while trying
to open the file, the L{Deferred} will fire with an error.
"""
p = self._path(path)
if p.isdir():
# Normally, we would only check for EISDIR in open, but win32
# returns EACCES in this case, so we check before
return defer.fail(IsADirectoryError(path))
try:
f = p.open("r")
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(_FileReader(f))
def openForWriting(self, path):
"""
Reject write attempts by anonymous users with
L{PermissionDeniedError}.
"""
return defer.fail(PermissionDeniedError("STOR not allowed"))
def access(self, path):
p = self._path(path)
if not p.exists():
# Again, win32 doesn't report a sane error after, so let's fail
# early if we can
return defer.fail(FileNotFoundError(path))
# For now, just see if we can os.listdir() it
try:
p.listdir()
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(None)
def stat(self, path, keys=()):
p = self._path(path)
if p.isdir():
try:
statResult = self._statNode(p, keys)
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(statResult)
else:
return self.list(path, keys).addCallback(lambda res: res[0][1])
def list(self, path, keys=()):
"""
Return the list of files at given C{path}, adding C{keys} stat
informations if specified.
@param path: the directory or file to check.
@type path: C{str}
@param keys: the list of desired metadata
@type keys: C{list} of C{str}
"""
filePath = self._path(path)
if filePath.isdir():
entries = filePath.listdir()
fileEntries = [filePath.child(p) for p in entries]
elif filePath.isfile():
entries = [os.path.join(*filePath.segmentsFrom(self.filesystemRoot))]
fileEntries = [filePath]
else:
return defer.fail(FileNotFoundError(path))
results = []
for fileName, filePath in zip(entries, fileEntries):
ent = []
results.append((fileName, ent))
if keys:
try:
ent.extend(self._statNode(filePath, keys))
except OSError as e:
return errnoToFailure(e.errno, fileName)
except BaseException:
return defer.fail()
return defer.succeed(results)
def _statNode(self, filePath, keys):
"""
Shortcut method to get stat info on a node.
@param filePath: the node to stat.
@type filePath: C{filepath.FilePath}
@param keys: the stat keys to get.
@type keys: C{iterable}
"""
filePath.restat()
return [getattr(self, "_stat_" + k)(filePath) for k in keys]
def _stat_size(self, fp):
"""
Get the filepath's size as an int
@param fp: L{twisted.python.filepath.FilePath}
@return: C{int} representing the size
"""
return fp.getsize()
def _stat_permissions(self, fp):
"""
Get the filepath's permissions object
@param fp: L{twisted.python.filepath.FilePath}
@return: L{twisted.python.filepath.Permissions} of C{fp}
"""
return fp.getPermissions()
def _stat_hardlinks(self, fp):
"""
Get the number of hardlinks for the filepath - if the number of
hardlinks is not yet implemented (say in Windows), just return 0 since
stat-ing a file in Windows seems to return C{st_nlink=0}.
(Reference:
U{http://stackoverflow.com/questions/5275731/os-stat-on-windows})
@param fp: L{twisted.python.filepath.FilePath}
@return: C{int} representing the number of hardlinks
"""
try:
return fp.getNumberOfHardLinks()
except NotImplementedError:
return 0
def _stat_modified(self, fp):
"""
Get the filepath's last modified date
@param fp: L{twisted.python.filepath.FilePath}
@return: C{int} as seconds since the epoch
"""
return fp.getModificationTime()
def _stat_owner(self, fp):
"""
Get the filepath's owner's username. If this is not implemented
(say in Windows) return the string "0" since stat-ing a file in
Windows seems to return C{st_uid=0}.
(Reference:
U{http://stackoverflow.com/questions/5275731/os-stat-on-windows})
@param fp: L{twisted.python.filepath.FilePath}
@return: C{str} representing the owner's username
"""
try:
userID = fp.getUserID()
except NotImplementedError:
return "0"
else:
if pwd is not None:
try:
return pwd.getpwuid(userID)[0]
except KeyError:
pass
return str(userID)
def _stat_group(self, fp):
"""
Get the filepath's owner's group. If this is not implemented
(say in Windows) return the string "0" since stat-ing a file in
Windows seems to return C{st_gid=0}.
(Reference:
U{http://stackoverflow.com/questions/5275731/os-stat-on-windows})
@param fp: L{twisted.python.filepath.FilePath}
@return: C{str} representing the owner's group
"""
try:
groupID = fp.getGroupID()
except NotImplementedError:
return "0"
else:
if grp is not None:
try:
return grp.getgrgid(groupID)[0]
except KeyError:
pass
return str(groupID)
def _stat_directory(self, fp):
"""
Get whether the filepath is a directory
@param fp: L{twisted.python.filepath.FilePath}
@return: C{bool}
"""
return fp.isdir()
@implementer(IReadFile)
class _FileReader:
def __init__(self, fObj):
self.fObj = fObj
self._send = False
def _close(self, passthrough):
self._send = True
self.fObj.close()
return passthrough
def send(self, consumer):
assert not self._send, "Can only call IReadFile.send *once* per instance"
self._send = True
d = basic.FileSender().beginFileTransfer(self.fObj, consumer)
d.addBoth(self._close)
return d
class FTPShell(FTPAnonymousShell):
"""
An authenticated implementation of L{IFTPShell}.
"""
def makeDirectory(self, path):
p = self._path(path)
try:
p.makedirs()
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(None)
def removeDirectory(self, path):
p = self._path(path)
if p.isfile():
# Win32 returns the wrong errno when rmdir is called on a file
# instead of a directory, so as we have the info here, let's fail
# early with a pertinent error
return defer.fail(IsNotADirectoryError(path))
try:
os.rmdir(p.path)
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(None)
def removeFile(self, path):
p = self._path(path)
if p.isdir():
# Win32 returns the wrong errno when remove is called on a
# directory instead of a file, so as we have the info here,
# let's fail early with a pertinent error
return defer.fail(IsADirectoryError(path))
try:
p.remove()
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
else:
return defer.succeed(None)
def rename(self, fromPath, toPath):
fp = self._path(fromPath)
tp = self._path(toPath)
try:
os.rename(fp.path, tp.path)
except OSError as e:
return errnoToFailure(e.errno, fromPath)
except BaseException:
return defer.fail()
else:
return defer.succeed(None)
def openForWriting(self, path):
"""
Open C{path} for writing.
@param path: The path, as a list of segments, to open.
@type path: C{list} of C{unicode}
@return: A L{Deferred} is returned that will fire with an object
implementing L{IWriteFile} if the file is successfully opened. If
C{path} is a directory, or if an exception is raised while trying
to open the file, the L{Deferred} will fire with an error.
"""
p = self._path(path)
if p.isdir():
# Normally, we would only check for EISDIR in open, but win32
# returns EACCES in this case, so we check before
return defer.fail(IsADirectoryError(path))
try:
fObj = p.open("w")
except OSError as e:
return errnoToFailure(e.errno, path)
except BaseException:
return defer.fail()
return defer.succeed(_FileWriter(fObj))
@implementer(IWriteFile)
class _FileWriter:
def __init__(self, fObj):
self.fObj = fObj
self._receive = False
def receive(self):
assert not self._receive, "Can only call IWriteFile.receive *once* per instance"
self._receive = True
# FileConsumer will close the file object
return defer.succeed(FileConsumer(self.fObj))
def close(self):
return defer.succeed(None)
@implementer(portal.IRealm)
class BaseFTPRealm:
"""
Base class for simple FTP realms which provides an easy hook for specifying
the home directory for each user.
"""
def __init__(self, anonymousRoot):
self.anonymousRoot = filepath.FilePath(anonymousRoot)
def getHomeDirectory(self, avatarId):
"""
Return a L{FilePath} representing the home directory of the given
avatar. Override this in a subclass.
@param avatarId: A user identifier returned from a credentials checker.
@type avatarId: C{str}
@rtype: L{FilePath}
"""
raise NotImplementedError(
f"{self.__class__!r} did not override getHomeDirectory"
)
def requestAvatar(self, avatarId, mind, *interfaces):
for iface in interfaces:
if iface is IFTPShell:
if avatarId is checkers.ANONYMOUS:
avatar = FTPAnonymousShell(self.anonymousRoot)
else:
avatar = FTPShell(self.getHomeDirectory(avatarId))
return (IFTPShell, avatar, getattr(avatar, "logout", lambda: None))
raise NotImplementedError("Only IFTPShell interface is supported by this realm")
class FTPRealm(BaseFTPRealm):
"""
@type anonymousRoot: L{twisted.python.filepath.FilePath}
@ivar anonymousRoot: Root of the filesystem to which anonymous
users will be granted access.
@type userHome: L{filepath.FilePath}
@ivar userHome: Root of the filesystem containing user home directories.
"""
def __init__(self, anonymousRoot, userHome="/home"):
BaseFTPRealm.__init__(self, anonymousRoot)
self.userHome = filepath.FilePath(userHome)
def getHomeDirectory(self, avatarId):
"""
Use C{avatarId} as a single path segment to construct a child of
C{self.userHome} and return that child.
"""
return self.userHome.child(avatarId)
class SystemFTPRealm(BaseFTPRealm):
"""
L{SystemFTPRealm} uses system user account information to decide what the
home directory for a particular avatarId is.
This works on POSIX but probably is not reliable on Windows.
"""
def getHomeDirectory(self, avatarId):
"""
Return the system-defined home directory of the system user account
with the name C{avatarId}.
"""
path = os.path.expanduser("~" + avatarId)
if path.startswith("~"):
raise cred_error.UnauthorizedLogin()
return filepath.FilePath(path)
# --- FTP CLIENT -------------------------------------------------------------
####
# And now for the client...
# Notes:
# * Reference: http://cr.yp.to/ftp.html
# * FIXME: Does not support pipelining (which is not supported by all
# servers anyway). This isn't a functionality limitation, just a
# small performance issue.
# * Only has a rudimentary understanding of FTP response codes (although
# the full response is passed to the caller if they so choose).
# * Assumes that USER and PASS should always be sent
# * Always sets TYPE I (binary mode)
# * Doesn't understand any of the weird, obscure TELNET stuff (\377...)
# * FIXME: Doesn't share any code with the FTPServer
class ConnectionLost(FTPError):
pass
class CommandFailed(FTPError):
pass
class BadResponse(FTPError):
pass
class UnexpectedResponse(FTPError):
pass
class UnexpectedData(FTPError):
pass
class FTPCommand:
def __init__(self, text=None, public=0):
self.text = text
self.deferred = defer.Deferred()
self.ready = 1
self.public = public
self.transferDeferred = None
def fail(self, failure):
if self.public:
self.deferred.errback(failure)
class ProtocolWrapper(protocol.Protocol):
def __init__(self, original, deferred):
self.original = original
self.deferred = deferred
def makeConnection(self, transport):
self.original.makeConnection(transport)
def dataReceived(self, data):
self.original.dataReceived(data)
def connectionLost(self, reason):
self.original.connectionLost(reason)
# Signal that transfer has completed
self.deferred.callback(None)
class IFinishableConsumer(interfaces.IConsumer):
"""
A Consumer for producers that finish.
@since: 11.0
"""
def finish():
"""
The producer has finished producing.
"""
@implementer(IFinishableConsumer)
class SenderProtocol(protocol.Protocol):
def __init__(self):
# Fired upon connection
self.connectedDeferred = defer.Deferred()
# Fired upon disconnection
self.deferred = defer.Deferred()
# Protocol stuff
def dataReceived(self, data):
raise UnexpectedData(
"Received data from the server on a " "send-only data-connection"
)
def makeConnection(self, transport):
protocol.Protocol.makeConnection(self, transport)
self.connectedDeferred.callback(self)
def connectionLost(self, reason):
if reason.check(error.ConnectionDone):
self.deferred.callback("connection done")
else:
self.deferred.errback(reason)
# IFinishableConsumer stuff
def write(self, data):
self.transport.write(data)
def registerProducer(self, producer, streaming):
"""
Register the given producer with our transport.
"""
self.transport.registerProducer(producer, streaming)
def unregisterProducer(self):
"""
Unregister the previously registered producer.
"""
self.transport.unregisterProducer()
def finish(self):
self.transport.loseConnection()
def decodeHostPort(line):
"""
Decode an FTP response specifying a host and port.
@return: a 2-tuple of (host, port).
"""
abcdef = re.sub("[^0-9, ]", "", line)
parsed = [int(p.strip()) for p in abcdef.split(",")]
for x in parsed:
if x < 0 or x > 255:
raise ValueError("Out of range", line, x)
a, b, c, d, e, f = parsed
host = f"{a}.{b}.{c}.{d}"
port = (int(e) << 8) + int(f)
return host, port
def encodeHostPort(host, port):
numbers = host.split(".") + [str(port >> 8), str(port % 256)]
return ",".join(numbers)
def _unwrapFirstError(failure):
failure.trap(defer.FirstError)
return failure.value.subFailure
class FTPDataPortFactory(protocol.ServerFactory):
"""
Factory for data connections that use the PORT command
(i.e. "active" transfers)
"""
noisy = False
def buildProtocol(self, addr):
# This is a bit hackish -- we already have a Protocol instance,
# so just return it instead of making a new one
# FIXME: Reject connections from the wrong address/port
# (potential security problem)
self.protocol.factory = self
self.port.loseConnection()
return self.protocol
class FTPClientBasic(basic.LineReceiver):
"""
Foundations of an FTP client.
"""
debug = False
_encoding = "latin-1"
def __init__(self):
self.actionQueue = []
self.greeting = None
self.nextDeferred = defer.Deferred().addCallback(self._cb_greeting)
self.nextDeferred.addErrback(self.fail)
self.response = []
self._failed = 0
def fail(self, error):
"""
Give an error to any queued deferreds.
"""
self._fail(error)
def _fail(self, error):
"""
Errback all queued deferreds.
"""
if self._failed:
# We're recursing; bail out here for simplicity
return error
self._failed = 1
if self.nextDeferred:
try:
self.nextDeferred.errback(
failure.Failure(ConnectionLost("FTP connection lost", error))
)
except defer.AlreadyCalledError:
pass
for ftpCommand in self.actionQueue:
ftpCommand.fail(
failure.Failure(ConnectionLost("FTP connection lost", error))
)
return error
def _cb_greeting(self, greeting):
self.greeting = greeting
def sendLine(self, line):
"""
Sends a line, unless line is None.
@param line: Line to send
@type line: L{bytes} or L{unicode}
"""
if line is None:
return
elif isinstance(line, str):
line = line.encode(self._encoding)
basic.LineReceiver.sendLine(self, line)
def sendNextCommand(self):
"""
(Private) Processes the next command in the queue.
"""
ftpCommand = self.popCommandQueue()
if ftpCommand is None:
self.nextDeferred = None
return
if not ftpCommand.ready:
self.actionQueue.insert(0, ftpCommand)
reactor.callLater(1.0, self.sendNextCommand)
self.nextDeferred = None
return
# FIXME: this if block doesn't belong in FTPClientBasic, it belongs in
# FTPClient.
if ftpCommand.text == "PORT":
self.generatePortCommand(ftpCommand)
if self.debug:
log.msg("<-- %s" % ftpCommand.text)
self.nextDeferred = ftpCommand.deferred
self.sendLine(ftpCommand.text)
def queueCommand(self, ftpCommand):
"""
Add an FTPCommand object to the queue.
If it's the only thing in the queue, and we are connected and we aren't
waiting for a response of an earlier command, the command will be sent
immediately.
@param ftpCommand: an L{FTPCommand}
"""
self.actionQueue.append(ftpCommand)
if (
len(self.actionQueue) == 1
and self.transport is not None
and self.nextDeferred is None
):
self.sendNextCommand()
def queueStringCommand(self, command, public=1):
"""
Queues a string to be issued as an FTP command
@param command: string of an FTP command to queue
@param public: a flag intended for internal use by FTPClient. Don't
change it unless you know what you're doing.
@return: a L{Deferred} that will be called when the response to the
command has been received.
"""
ftpCommand = FTPCommand(command, public)
self.queueCommand(ftpCommand)
return ftpCommand.deferred
def popCommandQueue(self):
"""
Return the front element of the command queue, or None if empty.
"""
if self.actionQueue:
return self.actionQueue.pop(0)
else:
return None
def queueLogin(self, username, password):
"""
Login: send the username, send the password.
If the password is L{None}, the PASS command won't be sent. Also, if
the response to the USER command has a response code of 230 (User
logged in), then PASS won't be sent either.
"""
# Prepare the USER command
deferreds = []
userDeferred = self.queueStringCommand("USER " + username, public=0)
deferreds.append(userDeferred)
# Prepare the PASS command (if a password is given)
if password is not None:
passwordCmd = FTPCommand("PASS " + password, public=0)
self.queueCommand(passwordCmd)
deferreds.append(passwordCmd.deferred)
# Avoid sending PASS if the response to USER is 230.
# (ref: http://cr.yp.to/ftp/user.html#user)
def cancelPasswordIfNotNeeded(response):
if response[0].startswith("230"):
# No password needed!
self.actionQueue.remove(passwordCmd)
return response
userDeferred.addCallback(cancelPasswordIfNotNeeded)
# Error handling.
for deferred in deferreds:
# If something goes wrong, call fail
deferred.addErrback(self.fail)
# But also swallow the error, so we don't cause spurious errors
deferred.addErrback(lambda x: None)
def lineReceived(self, line):
"""
(Private) Parses the response messages from the FTP server.
"""
# Add this line to the current response
if bytes != str:
line = line.decode(self._encoding)
if self.debug:
log.msg("--> %s" % line)
self.response.append(line)
# Bail out if this isn't the last line of a response
# The last line of response starts with 3 digits followed by a space
codeIsValid = re.match(r"\d{3} ", line)
if not codeIsValid:
return
code = line[0:3]
# Ignore marks
if code[0] == "1":
return
# Check that we were expecting a response
if self.nextDeferred is None:
self.fail(UnexpectedResponse(self.response))
return
# Reset the response
response = self.response
self.response = []
# Look for a success or error code, and call the appropriate callback
if code[0] in ("2", "3"):
# Success
self.nextDeferred.callback(response)
elif code[0] in ("4", "5"):
# Failure
self.nextDeferred.errback(failure.Failure(CommandFailed(response)))
else:
# This shouldn't happen unless something screwed up.
log.msg(f"Server sent invalid response code {code}")
self.nextDeferred.errback(failure.Failure(BadResponse(response)))
# Run the next command
self.sendNextCommand()
def connectionLost(self, reason):
self._fail(reason)
class _PassiveConnectionFactory(protocol.ClientFactory):
noisy = False
def __init__(self, protoInstance):
self.protoInstance = protoInstance
def buildProtocol(self, ignored):
self.protoInstance.factory = self
return self.protoInstance
def clientConnectionFailed(self, connector, reason):
e = FTPError("Connection Failed", reason)
self.protoInstance.deferred.errback(e)
class FTPClient(FTPClientBasic):
"""
L{FTPClient} is a client implementation of the FTP protocol which
exposes FTP commands as methods which return L{Deferred}s.
Each command method returns a L{Deferred} which is called back when a
successful response code (2xx or 3xx) is received from the server or
which is error backed if an error response code (4xx or 5xx) is received
from the server or if a protocol violation occurs. If an error response
code is received, the L{Deferred} fires with a L{Failure} wrapping a
L{CommandFailed} instance. The L{CommandFailed} instance is created
with a list of the response lines received from the server.
See U{RFC 959<http://www.ietf.org/rfc/rfc959.txt>} for error code
definitions.
Both active and passive transfers are supported.
@ivar passive: See description in __init__.
"""
connectFactory = reactor.connectTCP # type: ignore[attr-defined]
def __init__(
self, username="anonymous", password="twisted@twistedmatrix.com", passive=1
):
"""
Constructor.
I will login as soon as I receive the welcome message from the server.
@param username: FTP username
@param password: FTP password
@param passive: flag that controls if I use active or passive data
connections. You can also change this after construction by
assigning to C{self.passive}.
"""
FTPClientBasic.__init__(self)
self.queueLogin(username, password)
self.passive = passive
def fail(self, error):
"""
Disconnect, and also give an error to any queued deferreds.
"""
self.transport.loseConnection()
self._fail(error)
def receiveFromConnection(self, commands, protocol):
"""
Retrieves a file or listing generated by the given command,
feeding it to the given protocol.
@param commands: list of strings of FTP commands to execute then
receive the results of (e.g. C{LIST}, C{RETR})
@param protocol: A L{Protocol} B{instance} e.g. an
L{FTPFileListProtocol}, or something that can be adapted to one.
Typically this will be an L{IConsumer} implementation.
@return: L{Deferred}.
"""
protocol = interfaces.IProtocol(protocol)
wrapper = ProtocolWrapper(protocol, defer.Deferred())
return self._openDataConnection(commands, wrapper)
def queueLogin(self, username, password):
"""
Login: send the username, send the password, and
set retrieval mode to binary
"""
FTPClientBasic.queueLogin(self, username, password)
d = self.queueStringCommand("TYPE I", public=0)
# If something goes wrong, call fail
d.addErrback(self.fail)
# But also swallow the error, so we don't cause spurious errors
d.addErrback(lambda x: None)
def sendToConnection(self, commands):
"""
XXX
@return: A tuple of two L{Deferred}s:
- L{Deferred} L{IFinishableConsumer}. You must call
the C{finish} method on the IFinishableConsumer when the
file is completely transferred.
- L{Deferred} list of control-connection responses.
"""
s = SenderProtocol()
r = self._openDataConnection(commands, s)
return (s.connectedDeferred, r)
def _openDataConnection(self, commands, protocol):
"""
This method returns a DeferredList.
"""
cmds = [FTPCommand(command, public=1) for command in commands]
cmdsDeferred = defer.DeferredList(
[cmd.deferred for cmd in cmds], fireOnOneErrback=True, consumeErrors=True
)
cmdsDeferred.addErrback(_unwrapFirstError)
if self.passive:
# Hack: use a mutable object to sneak a variable out of the
# scope of doPassive
_mutable = [None]
def doPassive(response):
"""Connect to the port specified in the response to PASV"""
host, port = decodeHostPort(response[-1][4:])
f = _PassiveConnectionFactory(protocol)
_mutable[0] = self.connectFactory(host, port, f)
pasvCmd = FTPCommand("PASV")
self.queueCommand(pasvCmd)
pasvCmd.deferred.addCallback(doPassive).addErrback(self.fail)
results = [cmdsDeferred, pasvCmd.deferred, protocol.deferred]
d = defer.DeferredList(results, fireOnOneErrback=True, consumeErrors=True)
d.addErrback(_unwrapFirstError)
# Ensure the connection is always closed
def close(x, m=_mutable):
m[0] and m[0].disconnect()
return x
d.addBoth(close)
else:
# We just place a marker command in the queue, and will fill in
# the host and port numbers later (see generatePortCommand)
portCmd = FTPCommand("PORT")
# Ok, now we jump through a few hoops here.
# This is the problem: a transfer is not to be trusted as complete
# until we get both the "226 Transfer complete" message on the
# control connection, and the data socket is closed. Thus, we use
# a DeferredList to make sure we only fire the callback at the
# right time.
portCmd.transferDeferred = protocol.deferred
portCmd.protocol = protocol
portCmd.deferred.addErrback(portCmd.transferDeferred.errback)
self.queueCommand(portCmd)
# Create dummy functions for the next callback to call.
# These will also be replaced with real functions in
# generatePortCommand.
portCmd.loseConnection = lambda result: result
portCmd.fail = lambda error: error
# Ensure that the connection always gets closed
cmdsDeferred.addErrback(lambda e, pc=portCmd: pc.fail(e) or e)
results = [cmdsDeferred, portCmd.deferred, portCmd.transferDeferred]
d = defer.DeferredList(results, fireOnOneErrback=True, consumeErrors=True)
d.addErrback(_unwrapFirstError)
for cmd in cmds:
self.queueCommand(cmd)
return d
def generatePortCommand(self, portCmd):
"""
(Private) Generates the text of a given PORT command.
"""
# The problem is that we don't create the listening port until we need
# it for various reasons, and so we have to muck about to figure out
# what interface and port it's listening on, and then finally we can
# create the text of the PORT command to send to the FTP server.
# FIXME: This method is far too ugly.
# FIXME: The best solution is probably to only create the data port
# once per FTPClient, and just recycle it for each new download.
# This should be ok, because we don't pipeline commands.
# Start listening on a port
factory = FTPDataPortFactory()
factory.protocol = portCmd.protocol
listener = reactor.listenTCP(0, factory)
factory.port = listener
# Ensure we close the listening port if something goes wrong
def listenerFail(error, listener=listener):
if listener.connected:
listener.loseConnection()
return error
portCmd.fail = listenerFail
# Construct crufty FTP magic numbers that represent host & port
host = self.transport.getHost().host
port = listener.getHost().port
portCmd.text = "PORT " + encodeHostPort(host, port)
def escapePath(self, path):
"""
Returns a FTP escaped path (replace newlines with nulls).
"""
# Escape newline characters
return path.replace("\n", "\0")
def retrieveFile(self, path, protocol, offset=0):
"""
Retrieve a file from the given path
This method issues the 'RETR' FTP command.
The file is fed into the given Protocol instance. The data connection
will be passive if self.passive is set.
@param path: path to file that you wish to receive.
@param protocol: a L{Protocol} instance.
@param offset: offset to start downloading from
@return: L{Deferred}
"""
cmds = ["RETR " + self.escapePath(path)]
if offset:
cmds.insert(0, ("REST " + str(offset)))
return self.receiveFromConnection(cmds, protocol)
retr = retrieveFile
def storeFile(self, path, offset=0):
"""
Store a file at the given path.
This method issues the 'STOR' FTP command.
@return: A tuple of two L{Deferred}s:
- L{Deferred} L{IFinishableConsumer}. You must call
the C{finish} method on the IFinishableConsumer when the
file is completely transferred.
- L{Deferred} list of control-connection responses.
"""
cmds = ["STOR " + self.escapePath(path)]
if offset:
cmds.insert(0, ("REST " + str(offset)))
return self.sendToConnection(cmds)
stor = storeFile
def rename(self, pathFrom, pathTo):
"""
Rename a file.
This method issues the I{RNFR}/I{RNTO} command sequence to rename
C{pathFrom} to C{pathTo}.
@param pathFrom: the absolute path to the file to be renamed
@type pathFrom: C{str}
@param pathTo: the absolute path to rename the file to.
@type pathTo: C{str}
@return: A L{Deferred} which fires when the rename operation has
succeeded or failed. If it succeeds, the L{Deferred} is called
back with a two-tuple of lists. The first list contains the
responses to the I{RNFR} command. The second list contains the
responses to the I{RNTO} command. If either I{RNFR} or I{RNTO}
fails, the L{Deferred} is errbacked with L{CommandFailed} or
L{BadResponse}.
@rtype: L{Deferred}
@since: 8.2
"""
renameFrom = self.queueStringCommand("RNFR " + self.escapePath(pathFrom))
renameTo = self.queueStringCommand("RNTO " + self.escapePath(pathTo))
fromResponse = []
# Use a separate Deferred for the ultimate result so that Deferred
# chaining can't interfere with its result.
result = defer.Deferred()
# Bundle up all the responses
result.addCallback(lambda toResponse: (fromResponse, toResponse))
def ebFrom(failure):
# Make sure the RNTO doesn't run if the RNFR failed.
self.popCommandQueue()
result.errback(failure)
# Save the RNFR response to pass to the result Deferred later
renameFrom.addCallbacks(fromResponse.extend, ebFrom)
# Hook up the RNTO to the result Deferred as well
renameTo.chainDeferred(result)
return result
def list(self, path, protocol):
"""
Retrieve a file listing into the given protocol instance.
This method issues the 'LIST' FTP command.
@param path: path to get a file listing for.
@param protocol: a L{Protocol} instance, probably a
L{FTPFileListProtocol} instance. It can cope with most common file
listing formats.
@return: L{Deferred}
"""
if path is None:
path = ""
return self.receiveFromConnection(["LIST " + self.escapePath(path)], protocol)
def nlst(self, path, protocol):
"""
Retrieve a short file listing into the given protocol instance.
This method issues the 'NLST' FTP command.
NLST (should) return a list of filenames, one per line.
@param path: path to get short file listing for.
@param protocol: a L{Protocol} instance.
"""
if path is None:
path = ""
return self.receiveFromConnection(["NLST " + self.escapePath(path)], protocol)
def cwd(self, path):
"""
Issues the CWD (Change Working Directory) command.
@return: a L{Deferred} that will be called when done.
"""
return self.queueStringCommand("CWD " + self.escapePath(path))
def makeDirectory(self, path):
"""
Make a directory
This method issues the MKD command.
@param path: The path to the directory to create.
@type path: C{str}
@return: A L{Deferred} which fires when the server responds. If the
directory is created, the L{Deferred} is called back with the
server response. If the server response indicates the directory
was not created, the L{Deferred} is errbacked with a L{Failure}
wrapping L{CommandFailed} or L{BadResponse}.
@rtype: L{Deferred}
@since: 8.2
"""
return self.queueStringCommand("MKD " + self.escapePath(path))
def removeFile(self, path):
"""
Delete a file on the server.
L{removeFile} issues a I{DELE} command to the server to remove the
indicated file. Note that this command cannot remove a directory.
@param path: The path to the file to delete. May be relative to the
current dir.
@type path: C{str}
@return: A L{Deferred} which fires when the server responds. On error,
it is errbacked with either L{CommandFailed} or L{BadResponse}. On
success, it is called back with a list of response lines.
@rtype: L{Deferred}
@since: 8.2
"""
return self.queueStringCommand("DELE " + self.escapePath(path))
def removeDirectory(self, path):
"""
Delete a directory on the server.
L{removeDirectory} issues a I{RMD} command to the server to remove the
indicated directory. Described in RFC959.
@param path: The path to the directory to delete. May be relative to
the current working directory.
@type path: C{str}
@return: A L{Deferred} which fires when the server responds. On error,
it is errbacked with either L{CommandFailed} or L{BadResponse}. On
success, it is called back with a list of response lines.
@rtype: L{Deferred}
@since: 11.1
"""
return self.queueStringCommand("RMD " + self.escapePath(path))
def cdup(self):
"""
Issues the CDUP (Change Directory UP) command.
@return: a L{Deferred} that will be called when done.
"""
return self.queueStringCommand("CDUP")
def pwd(self):
"""
Issues the PWD (Print Working Directory) command.
The L{getDirectory} does the same job but automatically parses the
result.
@return: a L{Deferred} that will be called when done. It is up to the
caller to interpret the response, but the L{parsePWDResponse}
method in this module should work.
"""
return self.queueStringCommand("PWD")
def getDirectory(self):
"""
Returns the current remote directory.
@return: a L{Deferred} that will be called back with a C{str} giving
the remote directory or which will errback with L{CommandFailed}
if an error response is returned.
"""
def cbParse(result):
try:
# The only valid code is 257
if int(result[0].split(" ", 1)[0]) != 257:
raise ValueError
except (IndexError, ValueError):
return failure.Failure(CommandFailed(result))
path = parsePWDResponse(result[0])
if path is None:
return failure.Failure(CommandFailed(result))
return path
return self.pwd().addCallback(cbParse)
def quit(self):
"""
Issues the I{QUIT} command.
@return: A L{Deferred} that fires when the server acknowledges the
I{QUIT} command. The transport should not be disconnected until
this L{Deferred} fires.
"""
return self.queueStringCommand("QUIT")
class FTPFileListProtocol(basic.LineReceiver):
"""
Parser for standard FTP file listings
This is the evil required to match::
-rw-r--r-- 1 root other 531 Jan 29 03:26 README
If you need different evil for a wacky FTP server, you can
override either C{fileLinePattern} or C{parseDirectoryLine()}.
It populates the instance attribute self.files, which is a list containing
dicts with the following keys (examples from the above line):
- filetype: e.g. 'd' for directories, or '-' for an ordinary file
- perms: e.g. 'rw-r--r--'
- nlinks: e.g. 1
- owner: e.g. 'root'
- group: e.g. 'other'
- size: e.g. 531
- date: e.g. 'Jan 29 03:26'
- filename: e.g. 'README'
- linktarget: e.g. 'some/file'
Note that the 'date' value will be formatted differently depending on the
date. Check U{http://cr.yp.to/ftp.html} if you really want to try to parse
it.
It also matches the following::
-rw-r--r-- 1 root other 531 Jan 29 03:26 I HAVE\\ SPACE
- filename: e.g. 'I HAVE SPACE'
-rw-r--r-- 1 root other 531 Jan 29 03:26 LINK -> TARGET
- filename: e.g. 'LINK'
- linktarget: e.g. 'TARGET'
-rw-r--r-- 1 root other 531 Jan 29 03:26 N S -> L S
- filename: e.g. 'N S'
- linktarget: e.g. 'L S'
@ivar files: list of dicts describing the files in this listing
"""
fileLinePattern = re.compile(
r"^(?P<filetype>.)(?P<perms>.{9})\s+(?P<nlinks>\d*)\s*"
r"(?P<owner>\S+)\s+(?P<group>\S+)\s+(?P<size>\d+)\s+"
r"(?P<date>...\s+\d+\s+[\d:]+)\s+(?P<filename>.{1,}?)"
r"( -> (?P<linktarget>[^\r]*))?\r?$"
)
delimiter = b"\n"
_encoding = "latin-1"
def __init__(self):
self.files = []
def lineReceived(self, line):
if bytes != str:
line = line.decode(self._encoding)
d = self.parseDirectoryLine(line)
if d is None:
self.unknownLine(line)
else:
self.addFile(d)
def parseDirectoryLine(self, line):
"""
Return a dictionary of fields, or None if line cannot be parsed.
@param line: line of text expected to contain a directory entry
@type line: str
@return: dict
"""
match = self.fileLinePattern.match(line)
if match is None:
return None
else:
d = match.groupdict()
d["filename"] = d["filename"].replace(r"\ ", " ")
d["nlinks"] = int(d["nlinks"])
d["size"] = int(d["size"])
if d["linktarget"]:
d["linktarget"] = d["linktarget"].replace(r"\ ", " ")
return d
def addFile(self, info):
"""
Append file information dictionary to the list of known files.
Subclasses can override or extend this method to handle file
information differently without affecting the parsing of data
from the server.
@param info: dictionary containing the parsed representation
of the file information
@type info: dict
"""
self.files.append(info)
def unknownLine(self, line):
"""
Deal with received lines which could not be parsed as file
information.
Subclasses can override this to perform any special processing
needed.
@param line: unparsable line as received
@type line: str
"""
pass
def parsePWDResponse(response):
"""
Returns the path from a response to a PWD command.
Responses typically look like::
257 "/home/andrew" is current directory.
For this example, I will return C{'/home/andrew'}.
If I can't find the path, I return L{None}.
"""
match = re.search('"(.*)"', response)
if match:
return match.groups()[0]
else:
return None
Mini Shell