Current File : //lib/python3/dist-packages/serial/urlhandler/protocol_loop.py
#! python
#
# This module implements a loop back connection receiving itself what it sent.
#
# The purpose of this module is.. well... You can run the unit tests with it.
# and it was so easy to implement ;-)
#
# This file is part of pySerial. https://github.com/pyserial/pyserial
# (C) 2001-2020 Chris Liechti <cliechti@gmx.net>
#
# SPDX-License-Identifier: BSD-3-Clause
#
# URL format: loop://[option[/option...]]
# options:
# - "debug" print diagnostic messages
from __future__ import absolute_import
import logging
import numbers
import time
try:
import urlparse
except ImportError:
import urllib.parse as urlparse
try:
import queue
except ImportError:
import Queue as queue
from serial.serialutil import SerialBase, SerialException, to_bytes, iterbytes, SerialTimeoutException, PortNotOpenError
# map log level names to constants. used in from_url()
LOGGER_LEVELS = {
'debug': logging.DEBUG,
'info': logging.INFO,
'warning': logging.WARNING,
'error': logging.ERROR,
}
class Serial(SerialBase):
"""Serial port implementation that simulates a loop back connection in plain software."""
BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200)
def __init__(self, *args, **kwargs):
self.buffer_size = 4096
self.queue = None
self.logger = None
self._cancel_write = False
super(Serial, self).__init__(*args, **kwargs)
def open(self):
"""\
Open port with current settings. This may throw a SerialException
if the port cannot be opened.
"""
if self.is_open:
raise SerialException("Port is already open.")
self.logger = None
self.queue = queue.Queue(self.buffer_size)
if self._port is None:
raise SerialException("Port must be configured before it can be used.")
# not that there is anything to open, but the function applies the
# options found in the URL
self.from_url(self.port)
# not that there anything to configure...
self._reconfigure_port()
# all things set up get, now a clean start
self.is_open = True
if not self._dsrdtr:
self._update_dtr_state()
if not self._rtscts:
self._update_rts_state()
self.reset_input_buffer()
self.reset_output_buffer()
def close(self):
if self.is_open:
self.is_open = False
try:
self.queue.put_nowait(None)
except queue.Full:
pass
super(Serial, self).close()
def _reconfigure_port(self):
"""\
Set communication parameters on opened port. For the loop://
protocol all settings are ignored!
"""
# not that's it of any real use, but it helps in the unit tests
if not isinstance(self._baudrate, numbers.Integral) or not 0 < self._baudrate < 2 ** 32:
raise ValueError("invalid baudrate: {!r}".format(self._baudrate))
if self.logger:
self.logger.info('_reconfigure_port()')
def from_url(self, url):
"""extract host and port from an URL string"""
parts = urlparse.urlsplit(url)
if parts.scheme != "loop":
raise SerialException(
'expected a string in the form '
'"loop://[?logging={debug|info|warning|error}]": not starting '
'with loop:// ({!r})'.format(parts.scheme))
try:
# process options now, directly altering self
for option, values in urlparse.parse_qs(parts.query, True).items():
if option == 'logging':
logging.basicConfig() # XXX is that good to call it here?
self.logger = logging.getLogger('pySerial.loop')
self.logger.setLevel(LOGGER_LEVELS[values[0]])
self.logger.debug('enabled logging')
else:
raise ValueError('unknown option: {!r}'.format(option))
except ValueError as e:
raise SerialException(
'expected a string in the form '
'"loop://[?logging={debug|info|warning|error}]": {}'.format(e))
# - - - - - - - - - - - - - - - - - - - - - - - -
@property
def in_waiting(self):
"""Return the number of bytes currently in the input buffer."""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
# attention the logged value can differ from return value in
# threaded environments...
self.logger.debug('in_waiting -> {:d}'.format(self.queue.qsize()))
return self.queue.qsize()
def read(self, size=1):
"""\
Read size bytes from the serial port. If a timeout is set it may
return less characters as requested. With no timeout it will block
until the requested number of bytes is read.
"""
if not self.is_open:
raise PortNotOpenError()
if self._timeout is not None and self._timeout != 0:
timeout = time.time() + self._timeout
else:
timeout = None
data = bytearray()
while size > 0 and self.is_open:
try:
b = self.queue.get(timeout=self._timeout) # XXX inter char timeout
except queue.Empty:
if self._timeout == 0:
break
else:
if b is not None:
data += b
size -= 1
else:
break
# check for timeout now, after data has been read.
# useful for timeout = 0 (non blocking) read
if timeout and time.time() > timeout:
if self.logger:
self.logger.info('read timeout')
break
return bytes(data)
def cancel_read(self):
self.queue.put_nowait(None)
def cancel_write(self):
self._cancel_write = True
def write(self, data):
"""\
Output the given byte string over the serial port. Can block if the
connection is blocked. May raise SerialException if the connection is
closed.
"""
self._cancel_write = False
if not self.is_open:
raise PortNotOpenError()
data = to_bytes(data)
# calculate aprox time that would be used to send the data
time_used_to_send = 10.0 * len(data) / self._baudrate
# when a write timeout is configured check if we would be successful
# (not sending anything, not even the part that would have time)
if self._write_timeout is not None and time_used_to_send > self._write_timeout:
# must wait so that unit test succeeds
time_left = self._write_timeout
while time_left > 0 and not self._cancel_write:
time.sleep(min(time_left, 0.5))
time_left -= 0.5
if self._cancel_write:
return 0 # XXX
raise SerialTimeoutException('Write timeout')
for byte in iterbytes(data):
self.queue.put(byte, timeout=self._write_timeout)
return len(data)
def reset_input_buffer(self):
"""Clear input buffer, discarding all that is in the buffer."""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
self.logger.info('reset_input_buffer()')
try:
while self.queue.qsize():
self.queue.get_nowait()
except queue.Empty:
pass
def reset_output_buffer(self):
"""\
Clear output buffer, aborting the current output and
discarding all that is in the buffer.
"""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
self.logger.info('reset_output_buffer()')
try:
while self.queue.qsize():
self.queue.get_nowait()
except queue.Empty:
pass
@property
def out_waiting(self):
"""Return how many bytes the in the outgoing buffer"""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
# attention the logged value can differ from return value in
# threaded environments...
self.logger.debug('out_waiting -> {:d}'.format(self.queue.qsize()))
return self.queue.qsize()
def _update_break_state(self):
"""\
Set break: Controls TXD. When active, to transmitting is
possible.
"""
if self.logger:
self.logger.info('_update_break_state({!r})'.format(self._break_state))
def _update_rts_state(self):
"""Set terminal status line: Request To Send"""
if self.logger:
self.logger.info('_update_rts_state({!r}) -> state of CTS'.format(self._rts_state))
def _update_dtr_state(self):
"""Set terminal status line: Data Terminal Ready"""
if self.logger:
self.logger.info('_update_dtr_state({!r}) -> state of DSR'.format(self._dtr_state))
@property
def cts(self):
"""Read terminal status line: Clear To Send"""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
self.logger.info('CTS -> state of RTS ({!r})'.format(self._rts_state))
return self._rts_state
@property
def dsr(self):
"""Read terminal status line: Data Set Ready"""
if self.logger:
self.logger.info('DSR -> state of DTR ({!r})'.format(self._dtr_state))
return self._dtr_state
@property
def ri(self):
"""Read terminal status line: Ring Indicator"""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
self.logger.info('returning dummy for RI')
return False
@property
def cd(self):
"""Read terminal status line: Carrier Detect"""
if not self.is_open:
raise PortNotOpenError()
if self.logger:
self.logger.info('returning dummy for CD')
return True
# - - - platform specific - - -
# None so far
# simple client test
if __name__ == '__main__':
import sys
s = Serial('loop://')
sys.stdout.write('{}\n'.format(s))
sys.stdout.write("write...\n")
s.write("hello\n")
s.flush()
sys.stdout.write("read: {!r}\n".format(s.read(5)))
s.close()
Mini Shell